Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX1341E2 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX1341E2 10GBASE-LRM X2 1310nm 220m
10 Gb/s class 10GBASE-LRM (EDC, XAUI) X2 transceiver, 1310nm, up to 220m, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX1341E2
- Family
- FTLX1341
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX1341E2 datasheet (PDF)
FTLX1341E2 specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX1341E2 |
| Product family | FTLX1341 |
| Form factor | X2 |
| Standards / application | IEEE 802.3aq-2006 10GBASE-LRM; X2 MSA |
| Data rate | XAUI 4 × 3.125 Gb/s (10GbE) |
| Wavelength | 1260–1355 nm |
| Laser | Uncooled 1310 nm directly modulated Fabry-Perot |
| Reach | 220 m on OM1 (62.5 µm), OM2 and OM3 |
| Connector | SC (multimode); 70-pin host connector |
| Tx output power | −6.5 to +0.5 dBm (avg); OMA −4.5 to +1.5 dBm |
| Rx sensitivity | −6.5 dBm (OMA) |
| Rx overload / max input | +1.5 dBm |
| Extinction ratio | 3.5 dB min |
| Supply voltage | +5.0 V, +3.3 V, APS +1.2 V |
| Power dissipation | 4.0 W max |
| Operating temperature | Commercial |
| Diagnostics | Digital Optics Monitoring (DOM); MDIO management |
| Compliance | RoHS-6 (lead-free) |
| Lifecycle | Legacy / end-of-life |
| Variant note | Covered by datasheet |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX1341E2
The Finisar FTLX1341E2 (now a Coherent Corp. product, formerly II-VI) is a X2 10GBASE-LRM (EDC, XAUI) optical transceiver for 10 Gb/s class links at 1310nm over Duplex MMF SC, with reach up to 220m. It is a commercial-temperature part. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Hot pluggable X2 MSA form factor
- Total power consumption: 4.0 W maximum
- Transmission distance up to 220m
- Uncooled 1310 nm directly modulated Fabry-Perot (FP) laser
- Built In Advanced Electronic Dispersion Compensation (EDC)
- Digital Optics Monitoring (DOM)
FTLX1341E2: frequently asked questions
What is the Finisar FTLX1341E2?
The FTLX1341E2 is a Finisar X2 transceiver for 10GBASE-LRM (EDC, XAUI) at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX1341E2?
The FTLX1341E2 is specified for up to 220m over Duplex MMF SC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX1341E2?
Per the Finisar family datasheet, the FTLX1341E2 transmits −6.5 to +0.5 dBm (avg); OMA −4.5 to +1.5 dBm and has a receiver sensitivity of −6.5 dBm (OMA). Maximum receiver input is +1.5 dBm.
Does the FTLX1341E2 support DDM / digital diagnostics?
Yes. Digital Optics Monitoring (DOM); MDIO management. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX1341E2 use?
The FTLX1341E2 works at 1310nm over Duplex MMF SC. Both ends of a link must use the same optical standard.
Will the FTLX1341E2 work in my Cisco, Juniper, Arista or HPE switch?
The FTLX1341E2 follows the X2 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What temperature range is the FTLX1341E2 rated for?
The FTLX1341E2 is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX1341E2 part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is the FTLX1341E2 still available?
The FTLX1341E2 is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTLX1341E2 price in India and how do I order?
The Finisar FTLX1341E2 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX1341E2 need?
It runs from +5.0 V, +3.3 V, APS +1.2 V with power dissipation of 4.0 W max.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX1442E210GBASE-LR, 10kmFTLX1461E210GBASE-LR, 10kmFTLX8541E210GBASE-SR, 300mFTLX1841E210GBASE-ER, 40kmFTLX8561E210GBASE-SR, 300mFTLX1371D3BCL10GBASE-LRM, 220mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales