- Home
- Optical Transceivers
- Finisar (Coherent)
- 100M–1G
- FTRJ1322P1WTR
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTRJ1322P1WTR stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTRJ1322P1WTR OC-12 IR-1 SFP 1310nm 15km
622 Mb/s OC-12 IR-1 (622M), non-RoHS SFP transceiver, 1310nm, up to 15km, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTRJ1322P1WTR
- Family
- FTRJ1322P1
- Category
- Fiber optic transceiver modules
- Datasheet
- FTRJ1322P1WTR datasheet (PDF)
FTRJ1322P1WTR specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTRJ1322P1WTR |
| Product family | FTRJ1322P1 |
| Form factor | SFP |
| Standards / application | SONET OC-12 IR-1/STM S-4.1, OC-12 SR/STM I-4, OC-3 IR-1/STM S-1.1, OC-3 SR/STM I-1 |
| Data rate | Up to 622 Mb/s |
| Wavelength | 1310nm |
| Laser | Uncooled Fabry-Perot 1310 nm |
| Reach | 15km |
| Connector | Duplex LC |
| Supply voltage | 3.3 V |
| Power dissipation | <700 mW typical |
| Operating temperature | Industrial |
| Diagnostics | Built-in digital diagnostics |
| Lifecycle | Legacy / end-of-life |
| Variant note | Wide extraction bail |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTRJ1322P1WTR
The Finisar FTRJ1322P1WTR (now a Coherent Corp. product, formerly II-VI) is a SFP OC-12 IR-1 (622M), non-RoHS optical transceiver for 622 Mb/s links at 1310nm over SMF, with reach up to 15km. It is an industrial-temperature part. It belongs to Finisar's FTRJ1322P1 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.
- Up to 622 Mb/s bi-directional data links
- Hot-pluggable SFP footprint
- Built-in digital diagnostics
- Uncooled 1310nm Fabry-Perot laser
- Low power dissipation <700mW typical
FTRJ1322P1WTR: frequently asked questions
What is the Finisar FTRJ1322P1WTR?
The FTRJ1322P1WTR is a Finisar SFP transceiver for OC-12 IR-1 (622M), non-RoHS at 622 Mb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.
What is the maximum distance of the FTRJ1322P1WTR?
The FTRJ1322P1WTR is specified for up to 15km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTRJ1322P1WTR use?
The FTRJ1322P1WTR works at 1310nm over SMF. Both ends of a link must use the same optical standard.
Does the FTRJ1322P1WTR support DDM / digital diagnostics?
Yes. Built-in digital diagnostics. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTRJ1322P1WTR work in my Cisco, Juniper, Arista or HPE switch?
The FTRJ1322P1WTR follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTRJ1322P1WTR vs FTRJ1322P1BTR: what is the difference?
Both are in Finisar's FTRJ1322P1 family and share the same core optics; the suffix marks a different build option (latch, receiver or ordering variant). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTRJ1322P1WTR rated for?
The FTRJ1322P1WTR is an industrial-temperature part (per Finisar's part-number temperature code). Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTRJ1322P1WTR part number mean?
The FTRJ prefix marks Finisar's earlier-generation SFP / SFF family. The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is the FTRJ1322P1WTR still available?
The FTRJ1322P1WTR is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTRJ1322P1WTR price in India and how do I order?
The Finisar FTRJ1322P1WTR price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTRJ1322P1WTR need?
It runs from 3.3 V with power dissipation of <700 mW typical.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTRJ1322P1BTROC-12 IR-1, 15kmFTLF1318P3BTL1000BASE-LX / 1GFC, 10kmFTLF1217P2BTL100BASE-FX / OC-3 MM / ESCON, 2kmFTLF1323P1BTROC-3 SR-1/IR-1, STM S-1.1, 15kmFTLF1323P1BTLOC-3 LR-1, STM L-1.1, 40kmFTLF1322P1BTROC-12 IR-1, STM S-4.1, 15kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales