Next Gen Networks

FWLF15217D61

Finisar FWLF15217D61 CWDM multi-rate SFP CWDM 1611nm 50km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 2G–4G
  5. FWLF15217D61
2G-4G SFP OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FWLF15217D61 CWDM multi-rate SFP CWDM 1611nm 50km

up to 2.67 Gb/s CWDM multi-rate OC-48/STM-16, GbE, FC (to 2.67G) SFP transceiver, CWDM 1611nm, up to 50km, commercial (0 to 70 °c) temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FWLF15217D61
Family
FWLF15217D
Category
Fiber optic transceiver modules
Datasheet
FWLF15217D61 datasheet (PDF)
up to 2.67 Gb/sCWDM 1611nm50kmSFPCommercial tempHot-pluggable

FWLF15217D61 specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFWLF15217D61
Product familyFWLF15217D
Form factorSFP
Standards / applicationSONET, Gigabit Ethernet, Fibre Channel
Data rate0.622–2.67 Gb/s
Wavelength1471/1491/1511/1531/1551/1571/1591/1611 nm (8 CWDM channels)
LaserUncooled DFB
ReachLink budget 20–21.0 dB @2.67 Gb/s
ConnectorDuplex LC
Tx output power0 to +5 dBm
Rx sensitivity−20 dBm
Rx overload / max input0 dBm (max input per sensitivity range)
Extinction ratio8.2 dB
Supply voltage3.3 V (3.15–3.60 V)
Power dissipation< 700 mW
Operating temperatureCommercial (0 to 70 °C)
DiagnosticsBuilt-in digital diagnostics, 2-wire serial interface
ComplianceClass 1 laser product (FDA/CDRH, IEC-825)
LifecycleCurrent production
Variant noteWavelength 1611 nm (clasp color: brown)

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FWLF15217D61

The Finisar FWLF15217D61 (now a Coherent Corp. product, formerly II-VI) is a SFP CWDM multi-rate OC-48/STM-16, GbE, FC (to 2.67G) optical transceiver for up to 2.67 Gb/s links at CWDM 1611nm over SMF, with reach up to 50km. It is a commercial-temperature part rated 0 to 70 °C. It belongs to Finisar's FWLF15217D family, which has 8 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

  • Up to 2.67 Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • Built-in digital diagnostic functions
  • Very low jitter
  • Metal enclosure, for lower EMI
  • Single 3.3V power supply

FWLF15217D61: frequently asked questions

What is the Finisar FWLF15217D61?

The FWLF15217D61 is a Finisar SFP transceiver for CWDM multi-rate OC-48/STM-16, GbE, FC (to 2.67G) at up to 2.67 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

What is the maximum distance of the FWLF15217D61?

The FWLF15217D61 is specified for up to 50km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FWLF15217D61?

Per the Finisar family datasheet, the FWLF15217D61 transmits 0 to +5 dBm and has a receiver sensitivity of −20 dBm. Maximum receiver input is 0 dBm (max input per sensitivity range).

Does the FWLF15217D61 support DDM / digital diagnostics?

Yes. Built-in digital diagnostics, 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FWLF15217D61 use?

The FWLF15217D61 works at CWDM 1611nm over SMF. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.

Will the FWLF15217D61 work in my Cisco, Juniper, Arista or HPE switch?

The FWLF15217D61 follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FWLF15217D61 vs FWLF15217D47: what is the difference?

Both are in Finisar's FWLF15217D family. They differ in wavelength (CWDM 1611nm vs CWDM 1471nm). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FWLF15217D61 rated for?

The FWLF15217D61 is a commercial-temperature part rated 0 to 70 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FWLF15217D61 part number mean?

The FWLF prefix marks Finisar's CWDM / DWDM wavelength-specific SFP family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.

Is your FWLF15217D61 genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FWLF15217D61 price in India and how do I order?

The Finisar FWLF15217D61 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FWLF15217D61 need?

It runs from 3.3 V (3.15–3.60 V) with power dissipation of < 700 mW.

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.