- Home
- Optical Transceivers
- Alcatel-Lucent
- 10G
- XFP-10G-59DWD80
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact XFP-10G-59DWD80 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Alcatel-Lucent Enterprise XFP-10G-59DWD80 DWDM 100 GHz XFP ~80 km SMF
10 Gbps DWDM 100 GHz XFP transceiver, ITU ch 59, 1530.33 nm, up to ~80 km SMF, Ethernet. ALE-coded optic for OmniSwitch.
- Manufacturer
- Alcatel-Lucent Enterprise (ALE)
- Mfr part number
- XFP-10G-59DWD80
- Series
- OmniSwitch 10G XFP
- Category
- Fiber optic transceiver modules
- Datasheet
- XFP-10G-59DWD80 datasheet (PDF)
XFP-10G-59DWD80 specifications
| Attribute | Value |
|---|---|
| Part Number | XFP-10G-59DWD80 |
| Manufacturer | Alcatel-Lucent Enterprise (ALE) |
| Brand | Alcatel-Lucent Enterprise |
| Standard | DWDM 100 GHz (10GBASE-ZR class) |
| Form Factor | XFP, hot-swappable |
| Data Rate | 10 Gbps |
| Protocol | Ethernet |
| Wavelength | ITU ch 59, 1530.33 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | ~80 km SMF |
| Connector | LC duplex |
| Lifecycle | Distributor-listed (confirm before ordering) |
| Case Temp | 0 °C to 70 °C (commercial) |
| Dimensions | 8.5 × 18.35 × 78 mm |
| Compliance | IEEE 802.3, INF-8077i (XFP MSA) |
| Reach detail | ~80km SMF |
| Part-number note | Distributor-listed part number (not found on an ALE / Nokia document); confirm with us before ordering |
Values are as listed by Nokia / ALE distributors; this part number does not appear in a public vendor document. We confirm the exact code and specification with our distributor before dispatch.
About the Alcatel-Lucent Enterprise XFP-10G-59DWD80
The Alcatel-Lucent Enterprise XFP-10G-59DWD80 is a hot-swappable XFP DWDM 100 GHz optical transceiver for 10 Gbps Ethernet links over single-mode fiber, with an LC duplex interface and reach of up to ~80 km SMF. Vendor description: Per-channel orderable code of the XFP-10G-DWDM family documented by ALU (Transceivers Guide Apr-2011 p.3-33 lists exactly ITU ch 35/37/38/39/59 for OS9-XNI-U2/U6 6.3.4+, OS9-XNI-U2E, OS6850 10G). It is an Alcatel-Lucent Enterprise (ALE) coded optic for OmniSwitch ports, which validate the ALE part code at insertion. Typical uses: 10G uplinks, stacking alternatives, core and distribution links on OmniSwitch 6560 / 6860 / 6900 / 9900.
- 10 Gbps DWDM 100 GHz up to ~80 km SMF
- Genuine ALE part for OmniSwitch XFP ports
- Per-channel orderable code of the XFP-10G-DWDM family documented by AL
- LC duplex connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
XFP-10G-59DWD80: frequently asked questions
What is the Alcatel-Lucent Enterprise XFP-10G-59DWD80?
The XFP-10G-59DWD80 is an XFP DWDM 100 GHz module for 10 Gbps Ethernet links. It plugs into an XFP port on an Alcatel-Lucent Enterprise OmniSwitch and is used for 10G uplinks, stacking alternatives, core and distribution links on OmniSwitch 6560 / 6860 / 6900 / 9900.
What is the maximum distance of the XFP-10G-59DWD80?
Distributor listings give the XFP-10G-59DWD80 as ~80km SMF; we confirm the figure against the vendor specification before dispatch.
Which fiber and connector does the XFP-10G-59DWD80 need?
The XFP-10G-59DWD80 uses an LC duplex connector on single-mode fiber (OS2), at ITU ch 59, 1530.33 nm. Both ends of the link must use the same optical standard. CWDM / DWDM optics must match the channel of the mux/demux port and the far-end module.
Which OmniSwitch models support the XFP-10G-59DWD80?
ALE lists its transceivers per switch family in each OmniSwitch datasheet and the AOS Transceivers Guide; the XFP-10G-59DWD80 is listed by distributors as an ALE part. Send us your OmniSwitch model and AOS release and we check it before dispatch, so the port accepts the optic without a 'non-ALE transceiver' warning.
Can I use a third-party SFP instead of the ALE XFP-10G-59DWD80?
OmniSwitch ports log a warning for non-ALE coded optics and ALE support may ask you to use ALE parts. Next Gen Networks supplies the genuine ALE XFP-10G-59DWD80; if you want a lower-cost ALE-coded compatible module for non-critical links, ask us and we will quote both options.
Is the XFP-10G-59DWD80 part number confirmed?
The XFP-10G-59DWD80 is listed consistently by Nokia / ALE distributors with the specifications shown here, but it does not appear in a public vendor document (Nokia keeps its optics tables on the customer portal). We confirm the code and specification with our distributor before dispatch, so you only receive the exact part your BOM calls for.
Is your XFP-10G-59DWD80 genuine ALE?
Yes. Next Gen Networks supplies original Alcatel-Lucent Enterprise parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them in the switch or router transceiver inventory.
What is the XFP-10G-59DWD80 price in India and how do I order?
The Alcatel-Lucent Enterprise XFP-10G-59DWD80 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
AlcatelLucent_XFP-10G-59DWD80_Datasheet_NextGenNetworks.pdf
Related ALE parts
XFP-10G-CX410GBASE-CX4 copper, ~15 m CX4 cableXFP-10G-DWDMDWDM 100 GHz, ~80 km SMFXFP-10G-ER4010GBASE-ER, ~40 km SMFXFP-10G-LR10GBASE-LR, ~10 km SMFXFP-10G-SR10GBASE-SR, ~300 m OM3 MMFXFP-10G-ZR8010GBASE-ZR, ~80 km SMFTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales