- Home
- Optical Transceivers
- Alcatel-Lucent
- 1G
- SFP-GIG-51CWD60
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact SFP-GIG-51CWD60 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Alcatel-Lucent Enterprise SFP-GIG-51CWD60 CWDM 1000BASE SFP CWDM 1510nm 60 km class SMF
1 Gbps CWDM 1000BASE SFP transceiver, CWDM 1510 nm, up to 60 km class SMF, Ethernet. ALE-coded optic for OmniSwitch.
- Manufacturer
- Alcatel-Lucent Enterprise (ALE)
- Mfr part number
- SFP-GIG-51CWD60
- Series
- OmniSwitch 1G SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- SFP-GIG-51CWD60 datasheet (PDF)
SFP-GIG-51CWD60 specifications
| Attribute | Value |
|---|---|
| Part Number | SFP-GIG-51CWD60 |
| Manufacturer | Alcatel-Lucent Enterprise (ALE) |
| Brand | Alcatel-Lucent Enterprise |
| Standard | CWDM 1000BASE |
| Form Factor | SFP, hot-swappable |
| Data Rate | 1 Gbps |
| Protocol | Ethernet |
| Wavelength | CWDM 1510 nm (per code; reseller) |
| Media | Single-mode fiber (OS2) |
| Max Distance | 60 km class SMF |
| Connector | LC duplex |
| Lifecycle | Distributor-listed (confirm before ordering) |
| Case Temp | 0 °C to 70 °C (commercial) |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3, SFF-8472 (SFP MSA) |
| Reach detail | 60km class SMF (per code; reseller) |
| Part-number note | Distributor-listed part number (not found on an ALE / Nokia document); confirm with us before ordering |
Values are as listed by Nokia / ALE distributors; this part number does not appear in a public vendor document. We confirm the exact code and specification with our distributor before dispatch.
About the Alcatel-Lucent Enterprise SFP-GIG-51CWD60
The Alcatel-Lucent Enterprise SFP-GIG-51CWD60 is a hot-swappable SFP CWDM 1000BASE optical transceiver for 1 Gbps Ethernet links over single-mode fiber, with an LC duplex interface and reach of up to 60 km class SMF. Vendor description: Per-wavelength orderable code of the SFP-GIG-CWD / 'SFP-GIG-xxCWD60' family documented by ALU. It is an Alcatel-Lucent Enterprise (ALE) coded optic for OmniSwitch ports, which validate the ALE part code at insertion. Typical uses: Gigabit uplinks, campus and inter-building fiber, server and access links on OmniSwitch 6360 / 6450 / 6560 / 6860 / 6900 switches.
- 1 Gbps CWDM 1000BASE up to 60 km class SMF
- Genuine ALE part for OmniSwitch SFP / SFP+ ports
- Per-wavelength orderable code of the SFP-GIG-CWD / 'SFP-GIG-xxCWD60' f
- LC duplex connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
SFP-GIG-51CWD60: frequently asked questions
What is the Alcatel-Lucent Enterprise SFP-GIG-51CWD60?
The SFP-GIG-51CWD60 is an SFP CWDM 1000BASE module for 1 Gbps Ethernet links. It plugs into an SFP / SFP+ port on an Alcatel-Lucent Enterprise OmniSwitch and is used for Gigabit uplinks, campus and inter-building fiber, server and access links on OmniSwitch 6360 / 6450 / 6560 / 6860 / 6900 switches.
What is the maximum distance of the SFP-GIG-51CWD60?
Distributor listings give the SFP-GIG-51CWD60 as 60km class SMF (per code; reseller); we confirm the figure against the vendor specification before dispatch.
Which fiber and connector does the SFP-GIG-51CWD60 need?
The SFP-GIG-51CWD60 uses an LC duplex connector on single-mode fiber (OS2), at CWDM 1510 nm (per code; reseller). Both ends of the link must use the same optical standard. CWDM / DWDM optics must match the channel of the mux/demux port and the far-end module.
Which OmniSwitch models support the SFP-GIG-51CWD60?
ALE lists its transceivers per switch family in each OmniSwitch datasheet and the AOS Transceivers Guide; the SFP-GIG-51CWD60 is listed by distributors as an ALE part. Send us your OmniSwitch model and AOS release and we check it before dispatch, so the port accepts the optic without a 'non-ALE transceiver' warning.
Can I use a third-party SFP instead of the ALE SFP-GIG-51CWD60?
OmniSwitch ports log a warning for non-ALE coded optics and ALE support may ask you to use ALE parts. Next Gen Networks supplies the genuine ALE SFP-GIG-51CWD60; if you want a lower-cost ALE-coded compatible module for non-critical links, ask us and we will quote both options.
Is the SFP-GIG-51CWD60 part number confirmed?
The SFP-GIG-51CWD60 is listed consistently by Nokia / ALE distributors with the specifications shown here, but it does not appear in a public vendor document (Nokia keeps its optics tables on the customer portal). We confirm the code and specification with our distributor before dispatch, so you only receive the exact part your BOM calls for.
Is your SFP-GIG-51CWD60 genuine ALE?
Yes. Next Gen Networks supplies original Alcatel-Lucent Enterprise parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them in the switch or router transceiver inventory.
What is the SFP-GIG-51CWD60 price in India and how do I order?
The Alcatel-Lucent Enterprise SFP-GIG-51CWD60 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
AlcatelLucent_SFP-GIG-51CWD60_Datasheet_NextGenNetworks.pdf
Related ALE parts
SFP-GIG-BX-D1000BASE-BX10 BiDi, 10 km single-strand SMFSFP-GIG-BX-D201000BASE-BX BiDi 20 km, 20 km single-strand SMFSFP-GIG-BX-D401000BASE-BX BiDi 40 km, 40 km single-strand SMFSFP-GIG-BX-U1000BASE-BX10 BiDi, 10 km single-strand SMFSFP-GIG-BX-U201000BASE-BX BiDi 20 km, 20 km single-strand SMFSFP-GIG-BX-U401000BASE-BX BiDi 40 km, 40 km single-strand SMFTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales