- Home
- Optical Transceivers
- Finisar (Coherent)
- 100G
- FTLC9141SENM
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLC9141SENM stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLC9141SENM 100GBASE-SR4 + OTN CFP4 850nm 100m
100 Gb/s 100GBASE-SR4 + OTN multirate CFP4 transceiver, 850nm, up to 100m, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLC9141SENM
- Family
- FTLC9141
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLC9141SENM datasheet (PDF)
FTLC9141SENM specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLC9141SENM |
| Product family | FTLC9141 |
| Form factor | CFP4 |
| Standards / application | IEEE 802.3bm 100GBASE-SR4 and CAUI-4; CFP4 MSA |
| Data rate | 103.1 Gb/s |
| Wavelength | 850 nm band |
| Laser | 4x25G parallel VCSEL |
| Receiver | 4x25G PIN |
| Reach | 100 m |
| Connector | MPO (MTP12) |
| Supply voltage | 3.3 V |
| Power dissipation | 4 W |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics via MDIO interface per CFP MSA |
| Compliance | RoHS Directive 2011/65/EU |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLC9141SENM
The Finisar FTLC9141SENM (now a Coherent Corp. product, formerly II-VI) is a CFP4 100GBASE-SR4 + OTN multirate optical transceiver for 100 Gb/s links at 850nm over MMF parallel (MPO), with reach up to 100m. It is a commercial-temperature part. It belongs to Finisar's FTLC9141 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
- 100GBASE-SR4 100GbE, 103Gb/s
- 4x25G parallel VCSEL transmitter
- MPO receptacle
- Digital diagnostics via MDIO
FTLC9141SENM: frequently asked questions
What is the Finisar FTLC9141SENM?
The FTLC9141SENM is a Finisar CFP4 transceiver for 100GBASE-SR4 + OTN multirate at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
What is the maximum distance of the FTLC9141SENM?
The FTLC9141SENM is specified for up to 100m over MMF parallel (MPO). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLC9141SENM use?
The FTLC9141SENM works at 850nm over MMF parallel (MPO). Both ends of a link must use the same optical standard.
Does the FTLC9141SENM support DDM / digital diagnostics?
Yes. Digital diagnostics via MDIO interface per CFP MSA. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTLC9141SENM work in my Cisco, Juniper, Arista or HPE switch?
The FTLC9141SENM follows the CFP4 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLC9141SENM vs FTLC9141RENM: what is the difference?
Both are in Finisar's FTLC9141 family. They differ in build / application (100GBASE-SR4 + OTN multirate vs 100GBASE-SR4). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLC9141SENM rated for?
The FTLC9141SENM is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLC9141SENM part number mean?
The FTLC prefix marks Finisar's 100G family (QSFP28 / CFP / CFP2 / CFP4). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLC9141SENM genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLC9141SENM price in India and how do I order?
The Finisar FTLC9141SENM price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLC9141SENM need?
It runs from 3.3 V with power dissipation of 4 W.
Related Finisar parts
FTLC9141RENM100GBASE-SR4, 100mFTLD10CE3C12x11.3G, 100mFTLC8281SCNM100GBASE-SR10 + OTN multirate, 100m (150m OM4)FTLC8221SCNM100GBASE-SR10 + OTN multirate, 100mFTLC1122RDNL100GBASE-LR4 Gen2, 10kmFTLC1141RDNL100GBASE-LR4, 10kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales