- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX1370W4BTL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX1370W4BTL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX1370W4BTL 10G CPRI/OBSAI wireless SFP+ 1310nm 1.4km
10 Gb/s class 10G CPRI/OBSAI wireless SFP+ transceiver, 1310nm, up to 1.4km, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX1370W4BTL
- Family
- FTLX1370
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX1370W4BTL datasheet (PDF)
FTLX1370W4BTL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX1370W4BTL |
| Product family | FTLX1370 |
| Form factor | SFP+ |
| Standards / application | SFF-8431, SFF-8432, SFF-8472 Rev 10.2, CPRI Rev 5.0, OBSAI Rev V4.2 |
| Data rate | 2.4576–10.3 Gb/s (CPRI 2.4576/3.072/4.915/6.144/9.8304/10.1376 Gb/s) |
| Wavelength | 1260–1355 nm |
| Laser | Fabry-Perot laser (per Coherent product page) |
| Receiver | PIN (per Coherent product page) |
| Reach | 1.4 km on 9/125 µm SMF at 10.3125 Gb/s |
| Connector | Duplex LC |
| Tx output power | −8.2 to +0.5 dBm average |
| Rx sensitivity | −12.6 dBm @ 10.3 Gb/s (worst ER, BER<1E−12) |
| Extinction ratio | 3.5 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | 1 W max (supply current 300 mA) |
| Operating temperature | Industrial |
| Diagnostics | Digital diagnostics per SFP MSA / SFF-8472 |
| Compliance | RoHS |
| Lifecycle | Current production |
| Variant note | 10G CPRI wireless, 1.4 km, industrial temperature |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX1370W4BTL
The Finisar FTLX1370W4BTL (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10G CPRI/OBSAI wireless optical transceiver for 10 Gb/s class links at 1310nm over Duplex SMF LC, with reach up to 1.4km. It is an industrial-temperature part. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Up to 10.3125 Gb/s data links
- Up to 1.4 km at 10.3125 Gb/s on 9/125µm SMF
- Metal enclosure, for lower EMI
- Industrial operating temperature range: -40°C to 85°C
- 1 Watt Maximum Power Consumption
- Built-in digital diagnostic functions
FTLX1370W4BTL: frequently asked questions
What is the Finisar FTLX1370W4BTL?
The FTLX1370W4BTL is a Finisar SFP+ transceiver for 10G CPRI/OBSAI wireless at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX1370W4BTL?
The FTLX1370W4BTL is specified for up to 1.4km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX1370W4BTL?
Per the Finisar family datasheet, the FTLX1370W4BTL transmits −8.2 to +0.5 dBm average and has a receiver sensitivity of −12.6 dBm @ 10.3 Gb/s (worst ER, BER<1E−12).
Does the FTLX1370W4BTL support DDM / digital diagnostics?
Yes. Digital diagnostics per SFP MSA / SFF-8472. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX1370W4BTL use?
The FTLX1370W4BTL works at 1310nm over Duplex SMF LC. Both ends of a link must use the same optical standard.
Will the FTLX1370W4BTL work in my Cisco, Juniper, Arista or HPE switch?
The FTLX1370W4BTL follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What temperature range is the FTLX1370W4BTL rated for?
The FTLX1370W4BTL is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLX1370W4BTL part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX1370W4BTL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX1370W4BTL price in India and how do I order?
The Finisar FTLX1370W4BTL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX1370W4BTL need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of 1 W max (supply current 300 mA).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX1371D3BCL10GBASE-LRM, 220mFTLX1475D3BCL10GBASE-LR/LW, 10GFC, 10kmFTLX1472M3BCL10GBASE-LR / OC-192 SR-1 multirate, 10kmFTLX1772M3BCL10G multirate 40km, 40kmFTLX1375W4BTL9.8G CPRI wireless, 1.4kmFTLX1471D3BCL10GBASE-LR/LW, 10kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales