Actual product photos
available on request
To keep listings accurate, we share real photos of the exact J4858C stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
HPE Aruba J4858C 1000BASE-SX SFP 850nm 550 m
1 Gbps 1000BASE-SX SFP transceiver, 850 nm, up to 550 m. Genuine HPE Aruba part for HPE Aruba Networking CX switches (CX 6000 / 6100 / 6200 / 6300 / 6400) and ArubaOS-Switch models (2530, 2930F / 2930M, 3810M, 5400R).
- Manufacturer
- Hewlett Packard Enterprise (HPE Aruba Networking)
- Mfr part number
- J4858C
- Series
- HPE Aruba 1G SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- J4858C datasheet (PDF)
J4858C specifications
| Attribute | Value |
|---|---|
| Part Number | J4858C |
| Manufacturer | Hewlett Packard Enterprise (HPE Aruba Networking) |
| Brand | HPE Aruba Networking |
| Standard | 1000BASE-SX |
| Form Factor | SFP, hot-swappable |
| Data Rate | 1 Gbps |
| Wavelength | 850 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | 550 m OM2 50/125; 500 m 50/125 (400 MHz-km); 275 m OM1 62.5/125; 220 m 62.5/125 (160 MHz-km) |
| Connector | Duplex LC |
| Revisions | J4858A, J4858B, J4858C, J4858D |
| Lifecycle | HPE end-of-sale / superseded (stock on request); replaces J4858B |
| Case Temp | Per HPE datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3, SFP MSA (SFF-8472) |
| Product line | AOS-CX / ArubaOS-Switch (J / JL / R / S / Q series) |
| HPE description | HP X121 1G SFP LC SX Transceiver |
| Ordering note | HPE end-of-sale / superseded part; new or surplus stock on request. |
Values are from the HPE Aruba Networking Transceiver Guide (Edition 25, March 2026), HPE QuickSpecs and HPE / Aruba datasheets. Confirm your switch or gateway model and software release with us before ordering.
About the HPE Aruba J4858C
The HPE Aruba J4858C is a hot-swappable SFP 1000BASE-SX optical transceiver for 1 Gbps Ethernet links over multimode fiber, with an LC interface and reach of up to 550 m. HPE description: HP X121 1G SFP LC SX Transceiver. HPE has shipped this optic in revisions J4858A, J4858B, J4858C, J4858D; J4858D is the current one. Aruba switches and gateways check the HPE coding at insertion, so a genuine module avoids 'unsupported transceiver' messages and port shutdowns. Typical uses: Gigabit uplinks, campus and inter-building fiber, access and WAN hand-off links on HPE Aruba Networking CX switches (CX 6000 / 6100 / 6200 / 6300 / 6400) and ArubaOS-Switch models (2530, 2930F / 2930M, 3810M, 5400R).
- 1 Gbps 1000BASE-SX up to 550 m
- Genuine HPE Aruba part for Aruba CX / ArubaOS-Switch
- Revisions: J4858A, J4858B, J4858C, J4858D (J4858D is current)
- LC connector · Multimode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
J4858C: frequently asked questions
What is the HPE Aruba J4858C?
The J4858C is an SFP 1000BASE-SX module for 1 Gbps links (HPE description: HP X121 1G SFP LC SX Transceiver). It is used for Gigabit uplinks, campus and inter-building fiber, access and WAN hand-off links on HPE Aruba Networking CX switches (CX 6000 / 6100 / 6200 / 6300 / 6400) and ArubaOS-Switch models (2530, 2930F / 2930M, 3810M, 5400R).
What is the maximum distance of the J4858C?
HPE documentation lists the J4858C for 550 m OM2 50/125; 500 m 50/125 (400 MHz-km); 275 m OM1 62.5/125; 220 m 62.5/125 (160 MHz-km).
Which fiber and connector does the J4858C need?
The J4858C uses an LC connector on multimode fiber (OM3/OM4). Wavelength: 850 nm. Both ends of the link must use the same optical standard.
Which Aruba devices support the J4858C?
The J4858C is documented for HPE Aruba Networking CX switches (CX 6000 / 6100 / 6200 / 6300 / 6400) and ArubaOS-Switch models (2530, 2930F / 2930M, 3810M, 5400R). Support depends on the exact model and software release; send us your device model and release and we confirm it against HPE's Transceiver Guide before dispatch.
What is the difference between J4858C and J4858A, J4858B, J4858D?
They are revisions of the same HPE optic: same standard, reach and connector. J4858D is the revision HPE currently sells; older letters are end-of-sale. Newer Aruba switches and software releases may require the newer revision, so tell us your switch model and we supply the right one.
Is the J4858C still available?
HPE lists the J4858C as end-of-sale or superseded. HPE note: replaces J4858B. Next Gen Networks sources genuine new and surplus stock on request; tell us the quantity and we confirm availability or quote the current HPE equivalent.
Is your J4858C genuine Aruba?
Yes. Next Gen Networks supplies original HPE Aruba parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show interfaces transceiver'. If you want a lower-cost Aruba-coded compatible module for non-critical links, ask us and we quote both options.
What is the J4858C price in India and how do I order?
The HPE Aruba J4858C price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Aruba_J4858C_Datasheet_NextGenNetworks.pdf
Related Aruba parts
J4858A1000BASE-SX SFP, 220-275 mJ4858B1000BASE-SX SFP, 550 mJ4858D1000BASE-SX SFP, 550 mJ4859D1000BASE-LX SFP, 10 kmJ4860D1000BASE-LH SFP, 70 kmJ8177E1000BASE-T SFP, 100 mTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales