- Home
- Optical Transceivers
- Juniper
- 100G
- CFP-GEN2-CGE-ER4
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact CFP-GEN2-CGE-ER4 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper CFP-GEN2-CGE-ER4 100GBASE-ER4 CFP 1295-1309nm 40 km
100 Gbps (4 × 25G) 100GBASE-ER4 CFP transceiver, 1295.56/1300.05/1304.58/1309.14 nm, up to 40 km. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- CFP-GEN2-CGE-ER4
- Series
- Juniper 100G CFP
- Category
- Fiber optic transceiver modules
- Datasheet
- CFP-GEN2-CGE-ER4 datasheet (PDF)
CFP-GEN2-CGE-ER4 specifications
| Attribute | Value |
|---|---|
| Part Number | CFP-GEN2-CGE-ER4 |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100GBASE-ER4 |
| Form Factor | CFP, hot-swappable |
| Data Rate | 100 Gbps (4 × 25G) |
| Protocol | Ethernet |
| Wavelength | 1295.56/1300.05/1304.58/1309.14 nm (LAN-WDM) |
| Media | Single-mode fiber (OS2) |
| Max Distance | 40 km |
| Connector | Duplex LC |
| Juniper Part No. | 740-049763 |
| Lifecycle | Juniper End of Life (stock on request) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 13.6 × 82 × 144.8 mm |
| Compliance | IEEE 802.3ba, CFP MSA |
| Platforms | MX / ACX / PTX routers |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | 100GBASE-ER4 CFP (2nd Generation) pluggable module compliant with IEEE 802.3ba |
| Same standard, other names | CFP-100GBASE-ER4 |
| Ordering note | Juniper End-of-Life part; new or surplus stock on request. |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper CFP-GEN2-CGE-ER4
The Juniper CFP-GEN2-CGE-ER4 is a hot-swappable CFP 100GBASE-ER4 optical transceiver for 100 Gbps Ethernet links over single-mode fiber, with an LC interface and reach of up to 40 km. Juniper description: 100GBASE-ER4 CFP (2nd Generation) pluggable module compliant with IEEE 802.3ba. Juniper sells the same optical standard under other names for other platforms or temperature grades: CFP-100GBASE-ER4. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
- 100 Gbps 100GBASE-ER4 up to 40 km
- Genuine Juniper part for MX / ACX / PTX routers
- Same standard as CFP-100GBASE-ER4
- LC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
CFP-GEN2-CGE-ER4: frequently asked questions
What is the Juniper CFP-GEN2-CGE-ER4?
The CFP-GEN2-CGE-ER4 is a CFP 100GBASE-ER4 module for 100 Gbps links (100GBASE-ER4 CFP (2nd Generation) pluggable module compliant with IEEE 802.3ba). It is used for 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
What is the maximum distance of the CFP-GEN2-CGE-ER4?
Juniper lists the CFP-GEN2-CGE-ER4 for 40 km.
Which fiber and connector does the CFP-GEN2-CGE-ER4 need?
The CFP-GEN2-CGE-ER4 uses an LC connector on single-mode fiber (OS2). Wavelength: 1295.56/1300.05/1304.58/1309.14 nm (LAN-WDM). Both ends of the link must use the same optical standard.
Which Juniper devices support the CFP-GEN2-CGE-ER4?
The CFP-GEN2-CGE-ER4 is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between CFP-GEN2-CGE-ER4 and CFP-100GBASE-ER4?
They are the same optical standard (100GBASE-ER4, 40 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is the CFP-GEN2-CGE-ER4 still available?
Juniper has marked the CFP-GEN2-CGE-ER4 End of Life. Next Gen Networks sources genuine new and surplus stock on request; tell us the quantity and we confirm availability or quote the current Juniper equivalent.
Is your CFP-GEN2-CGE-ER4 genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the CFP-GEN2-CGE-ER4 price in India and how do I order?
The Juniper CFP-GEN2-CGE-ER4 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_CFP-GEN2-CGE-ER4_Datasheet_NextGenNetworks.pdf
Related Juniper parts
CFP-100GBASE-ER4100GBASE-ER4 CFP, 40 kmCFP-GEN2-100GBASE-LR4100GBASE-LR4 CFP, 10 kmSRX-CFP-100G-LR4100GBASE-LR4 CFP, 10 kmCFP-100GBASE-ZR100G ZR CFP, 80 kmSRX-CFP-100G-SR10100GBASE-SR10 CFP, 100 m OM3 / 150 m OM4CFP-100GBASE-SR10100GBASE-SR10 CFP, 100 m OM3 / 150 m OM4Telecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales