- Home
- Optical Transceivers
- Juniper
- 800G
- OSFP-2X400G-VR4-P
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact OSFP-2X400G-VR4-P stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper OSFP-2X400G-VR4-P 2x400GBASE-VR4 OSFP 850nm 50 m OM4
2 × 400 Gbps 2x400GBASE-VR4 OSFP transceiver, 850 nm, up to 50 m OM4. Genuine Juniper part for QFX, PTX, MX and ACX platforms with matching ports.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- OSFP-2X400G-VR4-P
- Series
- Juniper 800G OSFP
- Category
- Fiber optic transceiver modules
- Datasheet
- OSFP-2X400G-VR4-P datasheet (PDF)
OSFP-2X400G-VR4-P specifications
| Attribute | Value |
|---|---|
| Part Number | OSFP-2X400G-VR4-P |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 2x400GBASE-VR4 |
| Form Factor | OSFP, hot-swappable |
| Data Rate | 2 × 400 Gbps |
| Protocol | Ethernet |
| Wavelength | 850 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | 50 m OM4 |
| Connector | Dual MPO-12 APC |
| Breakout | 2 × 400G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | 20 to 70 °C |
| Dimensions | 13 × 22.6 × 100.4 mm |
| Compliance | IEEE 802.3, OSFP MSA, CMIS |
| Platforms | QFX / PTX / MX / ACX |
| Product line | EX / QFX (switching) |
| Juniper description | OSFP800, 2x400GBASE-VR4, 20C through 70C, OM4 50 m, Dual MPO-12/APC receptacle |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper OSFP-2X400G-VR4-P
The Juniper OSFP-2X400G-VR4-P is a hot-swappable OSFP 2x400GBASE-VR4 optical transceiver for 2 × 400 Gbps Ethernet links over multimode fiber, with a Dual MPO-12 APC interface and reach of up to 50 m OM4. Juniper description: OSFP800, 2x400GBASE-VR4, 20C through 70C, OM4 50 m, Dual MPO-12/APC receptacle. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 2 × 400G. Typical uses: 800G AI / data-center fabrics and 800G coherent DCI on QFX, PTX, MX and ACX platforms with matching ports.
- 2 × 400 Gbps 2x400GBASE-VR4 up to 50 m OM4
- Genuine Juniper part for QFX / PTX / MX / ACX
- Listed as current in Juniper's Hardware Compatibility Tool
- Dual MPO-12 APC connector · Multimode fiber
- Operating temperature: 20 to 70 °C
OSFP-2X400G-VR4-P: frequently asked questions
What is the Juniper OSFP-2X400G-VR4-P?
The OSFP-2X400G-VR4-P is an OSFP 2x400GBASE-VR4 module for 2 × 400 Gbps links (OSFP800, 2x400GBASE-VR4, 20C through 70C, OM4 50 m, Dual MPO-12/APC receptacle). It is used for 800G AI / data-center fabrics and 800G coherent DCI on QFX, PTX, MX and ACX platforms with matching ports.
What is the maximum distance of the OSFP-2X400G-VR4-P?
Juniper lists the OSFP-2X400G-VR4-P for 50 m OM4.
Which fiber and connector does the OSFP-2X400G-VR4-P need?
The OSFP-2X400G-VR4-P uses a Dual MPO-12 APC connector on multimode fiber (OM3/OM4). Wavelength: 850 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the OSFP-2X400G-VR4-P?
The OSFP-2X400G-VR4-P is listed by Juniper for QFX, PTX, MX and ACX platforms with matching ports. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
Does the OSFP-2X400G-VR4-P support breakout?
Yes, Juniper lists it for 2 × 400G operation. Use the matching optics at the far end and configure channelization on the port.
Is your OSFP-2X400G-VR4-P genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the OSFP-2X400G-VR4-P price in India and how do I order?
The Juniper OSFP-2X400G-VR4-P price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_OSFP-2X400G-VR4-P_Datasheet_NextGenNetworks.pdf
Related Juniper parts
OSFP-2X400G-LR4-P2x400G-LR4-10 OSFP, 10 kmOSFP-800G-DR8-2-P800GBASE-DR8-2 OSFP, 2 kmOSFP-2X400G-FR4-P2x400GBASE-FR4 OSFP, 2 kmOSFP-2X400G-DR4-P2x400GBASE-DR4 OSFP, 500 mOSFP-8X100G-FR18x100GBASE-FR1 OSFP, 2 kmOSFP-2X400G-DR42x400GBASE-DR4 OSFP, 500 mTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales