- Home
- Optical Transceivers
- Juniper
- 100M
- SRX-SFP-FE-FX
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact SRX-SFP-FE-FX stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper SRX-SFP-FE-FX 100BASE-FX SFP 1310nm 2 km
100 Mbps 100BASE-FX SFP transceiver, 1310 nm, up to 2 km. Genuine Juniper part for SRX Series firewalls.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- SRX-SFP-FE-FX
- Series
- Juniper 100M SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- SRX-SFP-FE-FX datasheet (PDF)
SRX-SFP-FE-FX specifications
| Attribute | Value |
|---|---|
| Part Number | SRX-SFP-FE-FX |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100BASE-FX |
| Form Factor | SFP, hot-swappable |
| Data Rate | 100 Mbps |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | 2 km |
| Connector | Duplex LC |
| Juniper Part No. | 740-011620 |
| Lifecycle | Juniper End of Life (stock on request) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3 / Telcordia as applicable, SFP MSA |
| Platforms | SRX firewalls |
| Product line | SRX (security) |
| Juniper description | SFP 100BASE-FX Optical Transceiver, LC connector |
| Same standard, other names | EX-SFP-1FE-FX, SFP-1FE-FX, SFP-1FE-FX-IT |
| Ordering note | Juniper End-of-Life part; new or surplus stock on request. |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper SRX-SFP-FE-FX
The Juniper SRX-SFP-FE-FX is a hot-swappable SFP 100BASE-FX optical transceiver for 100 Mbps Ethernet links over multimode fiber, with an LC interface and reach of up to 2 km. Juniper description: SFP 100BASE-FX Optical Transceiver, LC connector. Juniper sells the same optical standard under other names for other platforms or temperature grades: EX-SFP-1FE-FX, SFP-1FE-FX, SFP-1FE-FX-IT. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: Fast Ethernet fiber links on SRX Series firewalls.
- 100 Mbps 100BASE-FX up to 2 km
- Genuine Juniper part for SRX firewalls
- Same standard as EX-SFP-1FE-FX, SFP-1FE-FX
- LC connector · Multimode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
SRX-SFP-FE-FX: frequently asked questions
What is the Juniper SRX-SFP-FE-FX?
The SRX-SFP-FE-FX is an SFP 100BASE-FX module for 100 Mbps links (SFP 100BASE-FX Optical Transceiver, LC connector). It is used for Fast Ethernet fiber links on SRX Series firewalls.
What is the maximum distance of the SRX-SFP-FE-FX?
Juniper lists the SRX-SFP-FE-FX for 2 km.
Which fiber and connector does the SRX-SFP-FE-FX need?
The SRX-SFP-FE-FX uses an LC connector on multimode fiber (OM3/OM4). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the SRX-SFP-FE-FX?
The SRX-SFP-FE-FX is listed by Juniper for SRX Series firewalls. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between SRX-SFP-FE-FX and EX-SFP-1FE-FX, SFP-1FE-FX, SFP-1FE-FX-IT?
They are the same optical standard (100BASE-FX, 2 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is the SRX-SFP-FE-FX still available?
Juniper has marked the SRX-SFP-FE-FX End of Life. Next Gen Networks sources genuine new and surplus stock on request; tell us the quantity and we confirm availability or quote the current Juniper equivalent.
Is your SRX-SFP-FE-FX genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the SRX-SFP-FE-FX price in India and how do I order?
The Juniper SRX-SFP-FE-FX price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_SRX-SFP-FE-FX_Datasheet_NextGenNetworks.pdf
Related Juniper parts
EX-SFP-1FE-FX100BASE-FX SFP, 2 kmSFP-1FE-FX100BASE-FX SFP, 2 kmSFP-1FE-FX-IT100BASE-FX SFP, 2 kmSFP-FE20KT15R13100BASE-BX-D SFP, 20 kmSFP-FE20KT13R15100BASE-BX-U SFP, 20 kmSFP-1FE-LX-IT100BASE-LX SFP, 10 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales