- Home
- Optical Transceivers
- Juniper
- 100G
- CFP2-100G-LR4-D
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact CFP2-100G-LR4-D stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper CFP2-100G-LR4-D 100GBASE-LR4 CFP2 1295-1309nm 10 km
100 Gbps (4 × 25G) 100GBASE-LR4 CFP2 transceiver, 1295.56/1300.05/1304.58/1309.14 nm, up to 10 km. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- CFP2-100G-LR4-D
- Series
- Juniper 100G CFP2
- Category
- Fiber optic transceiver modules
- Datasheet
- CFP2-100G-LR4-D datasheet (PDF)
CFP2-100G-LR4-D specifications
| Attribute | Value |
|---|---|
| Part Number | CFP2-100G-LR4-D |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100GBASE-LR4 / OTU4 |
| Form Factor | CFP2, hot-swappable |
| Data Rate | 100 Gbps (4 × 25G) |
| Protocol | Ethernet |
| Wavelength | 1295.56/1300.05/1304.58/1309.14 nm (LAN-WDM) |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | Duplex LC |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | 0 to 70 °C |
| Dimensions | 12.4 × 41.5 × 107.5 mm |
| Compliance | CFP2 MSA (OIF for coherent) |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | CFP2, IEEE 100GBASE-LR4 and OTU-T 4I1-9D1F dual rate, SMF 10km, 0 to 70C, Duplex LC connector |
| Same standard, other names | CFP2-100GBASE-LR4 |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper CFP2-100G-LR4-D
The Juniper CFP2-100G-LR4-D is a hot-swappable CFP2 100GBASE-LR4 optical transceiver for 100 Gbps Ethernet links over single-mode fiber, with an LC interface and reach of up to 10 km. Juniper description: CFP2, IEEE 100GBASE-LR4 and OTU-T 4I1-9D1F dual rate, SMF 10km, 0 to 70C, Duplex LC connector. Juniper sells the same optical standard under other names for other platforms or temperature grades: CFP2-100GBASE-LR4. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
- 100 Gbps 100GBASE-LR4 up to 10 km
- Genuine Juniper part for MX / ACX / PTX routers
- Listed as current in Juniper's Hardware Compatibility Tool
- LC connector · Single-mode fiber
- Operating temperature: 0 to 70 °C
CFP2-100G-LR4-D: frequently asked questions
What is the Juniper CFP2-100G-LR4-D?
The CFP2-100G-LR4-D is a CFP2 100GBASE-LR4 module for 100 Gbps links (CFP2, IEEE 100GBASE-LR4 and OTU-T 4I1-9D1F dual rate, SMF 10km, 0 to 70C, Duplex LC connector). It is used for 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
What is the maximum distance of the CFP2-100G-LR4-D?
Juniper lists the CFP2-100G-LR4-D for 10 km.
Which fiber and connector does the CFP2-100G-LR4-D need?
The CFP2-100G-LR4-D uses an LC connector on single-mode fiber (OS2). Wavelength: 1295.56/1300.05/1304.58/1309.14 nm (LAN-WDM). Both ends of the link must use the same optical standard.
Which Juniper devices support the CFP2-100G-LR4-D?
The CFP2-100G-LR4-D is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between CFP2-100G-LR4-D and CFP2-100GBASE-LR4?
They are the same optical standard (100GBASE-LR4, 10 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your CFP2-100G-LR4-D genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the CFP2-100G-LR4-D price in India and how do I order?
The Juniper CFP2-100G-LR4-D price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_CFP2-100G-LR4-D_Datasheet_NextGenNetworks.pdf
Related Juniper parts
CFP2-100GBASE-LR4100GBASE-LR4 CFP2, 10 kmCFP2-100G-ER4-D100GBASE-ER4 CFP2, 40 kmCFP2-100G-SR10-D3100GBASE-SR10 CFP2, 100 m OM3 / 150 m OM4CFP2-100GBASE-ER4100GBASE-ER4 CFP2, 40 kmCFP2-100GBASE-SR10100GBASE-SR10 CFP2, 100 m OM3 / 150 m OM4CFP2-DCO-100G-HG100G coherent DWDM CFP2, 2000 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales