- Home
- Optical Transceivers
- Juniper
- 100M
- SFP-1FE-LX-IT
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact SFP-1FE-LX-IT stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper SFP-1FE-LX-IT 100BASE-LX SFP 1310nm 10 km
100 Mbps 100BASE-LX SFP transceiver, 1310 nm, up to 10 km. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- SFP-1FE-LX-IT
- Series
- Juniper 100M SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- SFP-1FE-LX-IT datasheet (PDF)
SFP-1FE-LX-IT specifications
| Attribute | Value |
|---|---|
| Part Number | SFP-1FE-LX-IT |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100BASE-LX |
| Form Factor | SFP, hot-swappable |
| Data Rate | 100 Mbps |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | Duplex LC |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | -40 to 85 °C (industrial) |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3 / Telcordia as applicable, SFP MSA |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | SFP 100BASE-LX, LC connector, 1310nm, 10km Reach on Single Mode Fiber, I-Temp |
| Same standard, other names | EX-SFP-1FE-LX |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper SFP-1FE-LX-IT
The Juniper SFP-1FE-LX-IT is a hot-swappable SFP 100BASE-LX optical transceiver for 100 Mbps Ethernet links over single-mode fiber, with an LC interface and reach of up to 10 km. Juniper description: SFP 100BASE-LX, LC connector, 1310nm, 10km Reach on Single Mode Fiber, I-Temp. Juniper sells the same optical standard under other names for other platforms or temperature grades: EX-SFP-1FE-LX. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: Fast Ethernet fiber links on MX, ACX and PTX Series routers.
- 100 Mbps 100BASE-LX up to 10 km
- Genuine Juniper part for MX / ACX / PTX routers
- Listed as current in Juniper's Hardware Compatibility Tool
- LC connector · Single-mode fiber
- Operating temperature: -40 to 85 °C (industrial)
SFP-1FE-LX-IT: frequently asked questions
What is the Juniper SFP-1FE-LX-IT?
The SFP-1FE-LX-IT is an SFP 100BASE-LX module for 100 Mbps links (SFP 100BASE-LX, LC connector, 1310nm, 10km Reach on Single Mode Fiber, I-Temp). It is used for Fast Ethernet fiber links on MX, ACX and PTX Series routers.
What is the maximum distance of the SFP-1FE-LX-IT?
Juniper lists the SFP-1FE-LX-IT for 10 km.
Which fiber and connector does the SFP-1FE-LX-IT need?
The SFP-1FE-LX-IT uses an LC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the SFP-1FE-LX-IT?
The SFP-1FE-LX-IT is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between SFP-1FE-LX-IT and EX-SFP-1FE-LX?
They are the same optical standard (100BASE-LX, 10 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is the SFP-1FE-LX-IT an industrial-temperature module?
Yes, Juniper lists it for -40 to 85 °C operation, so it suits outdoor cabinets, cell sites and other unconditioned locations.
Is your SFP-1FE-LX-IT genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the SFP-1FE-LX-IT price in India and how do I order?
The Juniper SFP-1FE-LX-IT price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_SFP-1FE-LX-IT_Datasheet_NextGenNetworks.pdf
Related Juniper parts
EX-SFP-1FE-LX100BASE-LX SFP, 10 kmSFP-1FE-FX-IT100BASE-FX SFP, 2 kmSFP-FE20KT13R15100BASE-BX-U SFP, 20 kmSFP-1FE-FX100BASE-FX SFP, 2 kmSFP-FE20KT15R13100BASE-BX-D SFP, 20 kmEX-SFP-FE20KT15R13100BASE-BX-D SFP, 20 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales