- Home
- Optical Transceivers
- Juniper
- 100G
- QSFP-4X25G-LR
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QSFP-4X25G-LR stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QSFP-4X25G-LR 4x25GBASE-LR QSFP28 1310nm 10 km
4 × 25 Gbps breakout 4x25GBASE-LR QSFP28 transceiver, 1310 nm, up to 10 km. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QSFP-4X25G-LR
- Series
- Juniper 100G QSFP28
- Category
- Fiber optic transceiver modules
- Datasheet
- QSFP-4X25G-LR datasheet (PDF)
QSFP-4X25G-LR specifications
| Attribute | Value |
|---|---|
| Part Number | QSFP-4X25G-LR |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 4x25GBASE-LR |
| Form Factor | QSFP28, hot-swappable |
| Data Rate | 4 × 25 Gbps breakout |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 2 m to 10 km |
| Connector | MPO-12 APC |
| Breakout | 4 × 25G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 18.4 × 72.4 mm |
| Compliance | IEEE 802.3, SFF-8636 |
| Platforms | MX / ACX / PTX routers |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | QSFP28 4x25G LR Transceiver (breakout) |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QSFP-4X25G-LR
The Juniper QSFP-4X25G-LR is a hot-swappable QSFP28 4x25GBASE-LR optical transceiver for 4 × 25 Gbps breakout Ethernet links over single-mode fiber, with an MPO-12 APC interface and reach of up to 10 km. Juniper description: QSFP28 4x25G LR Transceiver (breakout). Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 4 × 25G. Typical uses: 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
- 4 × 25 Gbps breakout 4x25GBASE-LR up to 10 km
- Genuine Juniper part for MX / ACX / PTX routers
- Listed as current in Juniper's Hardware Compatibility Tool
- MPO-12 APC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
QSFP-4X25G-LR: frequently asked questions
What is the Juniper QSFP-4X25G-LR?
The QSFP-4X25G-LR is a QSFP28 4x25GBASE-LR module for 4 × 25 Gbps breakout links (QSFP28 4x25G LR Transceiver (breakout)). It is used for 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
What is the maximum distance of the QSFP-4X25G-LR?
Juniper lists the QSFP-4X25G-LR for 2 m to 10 km.
Which fiber and connector does the QSFP-4X25G-LR need?
The QSFP-4X25G-LR uses an MPO-12 APC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QSFP-4X25G-LR?
The QSFP-4X25G-LR is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
Does the QSFP-4X25G-LR support breakout?
Yes, Juniper lists it for 4 × 25G operation. Use the matching optics at the far end and configure channelization on the port.
Is your QSFP-4X25G-LR genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QSFP-4X25G-LR price in India and how do I order?
The Juniper QSFP-4X25G-LR price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QSFP-4X25G-LR_Datasheet_NextGenNetworks.pdf
Related Juniper parts
QSFP-100GBASE-SR4100GBASE-SR4 QSFP28, 70 m OM3 / 100 m OM4QSFP-100GBASE-LR4100GBASE-LR4 QSFP28, 10 kmQSFP-100GBASE-CWDM100G CWDM4 QSFP28, 2 kmQSFP-100G-ZR4100G ZR4 QSFP28, 60 kmQSFP-100G-ZR-IT100GBASE-ZR QSFP28, 80 km unamplifiedQSFP-100G-ZR-HP100GBASE-ZR QSFP28, 120 km unamplifiedTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales