- Home
- Optical Transceivers
- Juniper
- 100G
- CFP2-100G-SR10-D3
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact CFP2-100G-SR10-D3 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper CFP2-100G-SR10-D3 100GBASE-SR10 CFP2 850nm
100 Gbps (10 × 10G) 100GBASE-SR10 CFP2 transceiver, 850 nm, up to 100 m OM3 / 150 m OM4. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- CFP2-100G-SR10-D3
- Series
- Juniper 100G CFP2
- Category
- Fiber optic transceiver modules
- Datasheet
- CFP2-100G-SR10-D3 datasheet (PDF)
CFP2-100G-SR10-D3 specifications
| Attribute | Value |
|---|---|
| Part Number | CFP2-100G-SR10-D3 |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100GBASE-SR10 |
| Form Factor | CFP2, hot-swappable |
| Data Rate | 100 Gbps (10 × 10G) |
| Protocol | Ethernet |
| Wavelength | 850 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | 100 m (OM3) / 150 m (OM4) |
| Connector | MPO-24 |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 12.4 × 41.5 × 107.5 mm |
| Compliance | CFP2 MSA (OIF for coherent) |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | CFP2 100G Short range optics for Ethernet and OTN dual rate, used for Single rate Ethernet |
| Same standard, other names | CFP2-100GBASE-SR10 |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper CFP2-100G-SR10-D3
The Juniper CFP2-100G-SR10-D3 is a hot-swappable CFP2 100GBASE-SR10 optical transceiver for 100 Gbps Ethernet links over multimode fiber, with an MPO-24 interface and reach of up to 100 m OM3 / 150 m OM4. Juniper description: CFP2 100G Short range optics for Ethernet and OTN dual rate, used for Single rate Ethernet. Juniper sells the same optical standard under other names for other platforms or temperature grades: CFP2-100GBASE-SR10. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
- 100 Gbps 100GBASE-SR10 up to 100 m OM3 / 150 m OM4
- Genuine Juniper part for MX / ACX / PTX routers
- Listed as current in Juniper's Hardware Compatibility Tool
- MPO-24 connector · Multimode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
CFP2-100G-SR10-D3: frequently asked questions
What is the Juniper CFP2-100G-SR10-D3?
The CFP2-100G-SR10-D3 is a CFP2 100GBASE-SR10 module for 100 Gbps links (CFP2 100G Short range optics for Ethernet and OTN dual rate, used for Single rate Ethernet). It is used for 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
What is the maximum distance of the CFP2-100G-SR10-D3?
Juniper lists the CFP2-100G-SR10-D3 for 100 m (OM3) / 150 m (OM4).
Which fiber and connector does the CFP2-100G-SR10-D3 need?
The CFP2-100G-SR10-D3 uses an MPO-24 connector on multimode fiber (OM3/OM4). Wavelength: 850 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the CFP2-100G-SR10-D3?
The CFP2-100G-SR10-D3 is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between CFP2-100G-SR10-D3 and CFP2-100GBASE-SR10?
They are the same optical standard (100GBASE-SR10, 100 m OM3 / 150 m OM4) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your CFP2-100G-SR10-D3 genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the CFP2-100G-SR10-D3 price in India and how do I order?
The Juniper CFP2-100G-SR10-D3 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_CFP2-100G-SR10-D3_Datasheet_NextGenNetworks.pdf
Related Juniper parts
CFP2-100GBASE-SR10100GBASE-SR10 CFP2, 100 m OM3 / 150 m OM4CFP2-100GBASE-ER4100GBASE-ER4 CFP2, 40 kmCFP2-100G-LR4-D100GBASE-LR4 CFP2, 10 kmCFP2-100GBASE-LR4100GBASE-LR4 CFP2, 10 kmCFP2-100G-ER4-D100GBASE-ER4 CFP2, 40 kmCFP2-DCO-100G-HG100G coherent DWDM CFP2, 2000 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales