- Home
- Optical Transceivers
- Juniper
- 400G
- QDD-4X100G-LR
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QDD-4X100G-LR stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QDD-4X100G-LR 4x100G-LR QSFP-DD 1310nm 10 km
4 × 100 Gbps breakout 4x100G-LR QSFP-DD transceiver, 1310 nm, up to 10 km. Genuine Juniper part for QFX, PTX, MX and ACX platforms with matching ports.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QDD-4X100G-LR
- Series
- Juniper 400G QSFP-DD
- Category
- Fiber optic transceiver modules
- Datasheet
- QDD-4X100G-LR datasheet (PDF)
QDD-4X100G-LR specifications
| Attribute | Value |
|---|---|
| Part Number | QDD-4X100G-LR |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 4x100G-LR (breakout) |
| Form Factor | QSFP-DD, hot-swappable |
| Data Rate | 4 × 100 Gbps breakout |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | MPO-12 APC |
| Breakout | 4 × 100G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | 0 to 70 °C |
| Dimensions | 8.5 × 18.4 × 78–93 mm |
| Compliance | IEEE 802.3, QSFP-DD MSA, CMIS |
| Platforms | QFX / PTX / MX / ACX |
| Product line | JNP generic (multi-platform) |
| Juniper description | QSFP-DD 4x100G-LR, SMF 10 km |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QDD-4X100G-LR
The Juniper QDD-4X100G-LR is a hot-swappable QSFP-DD 4x100G-LR optical transceiver for 4 × 100 Gbps breakout Ethernet links over single-mode fiber, with an MPO-12 APC interface and reach of up to 10 km. Juniper description: QSFP-DD 4x100G-LR, SMF 10 km. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 4 × 100G. Typical uses: 400G spine, AI / data-center fabrics and routed-optical (ZR / ZR+) DCI on QFX, PTX, MX and ACX platforms with matching ports.
- 4 × 100 Gbps breakout 4x100G-LR up to 10 km
- Genuine Juniper part for QFX / PTX / MX / ACX
- Listed as current in Juniper's Hardware Compatibility Tool
- MPO-12 APC connector · Single-mode fiber
- Operating temperature: 0 to 70 °C
QDD-4X100G-LR: frequently asked questions
What is the Juniper QDD-4X100G-LR?
The QDD-4X100G-LR is a QSFP-DD 4x100G-LR module for 4 × 100 Gbps breakout links (QSFP-DD 4x100G-LR, SMF 10 km). It is used for 400G spine, AI / data-center fabrics and routed-optical (ZR / ZR+) DCI on QFX, PTX, MX and ACX platforms with matching ports.
What is the maximum distance of the QDD-4X100G-LR?
Juniper lists the QDD-4X100G-LR for 10 km.
Which fiber and connector does the QDD-4X100G-LR need?
The QDD-4X100G-LR uses an MPO-12 APC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QDD-4X100G-LR?
The QDD-4X100G-LR is listed by Juniper for QFX, PTX, MX and ACX platforms with matching ports. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
Does the QDD-4X100G-LR support breakout?
Yes, Juniper lists it for 4 × 100G operation. Use the matching optics at the far end and configure channelization on the port.
Is your QDD-4X100G-LR genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QDD-4X100G-LR price in India and how do I order?
The Juniper QDD-4X100G-LR price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QDD-4X100G-LR_Datasheet_NextGenNetworks.pdf
Related Juniper parts
QDD-4X100G-FR4x100G-FR QSFP-DD, 2 kmQDD-4C-ZRM-P-B400G OpenZR+ QSFP-DDQDD-4C-ZRM-HP-P-B400G OpenZR+ high power QSFP-DDQDD-4C-ZR-P-BOIF 400ZR QSFP-DDQDD-400G-ZR-M-HP400G OpenZR+ high Tx power QSFP-DD, 40 km to 2000+ kmQDD-400G-ZR-M400G OpenZR+ QSFP-DD, 40 km to 2000+ kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales