- Home
- Optical Transceivers
- Juniper
- 40G
- QSFPP-4X10GE-LR
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QSFPP-4X10GE-LR stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QSFPP-4X10GE-LR 4x10GBASE-LR QSFP+ 1310nm 10 km
4 × 10 Gbps breakout 4x10GBASE-LR QSFP+ transceiver, 1310 nm, up to 10 km. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QSFPP-4X10GE-LR
- Series
- Juniper 40G QSFP+
- Category
- Fiber optic transceiver modules
- Datasheet
- QSFPP-4X10GE-LR datasheet (PDF)
QSFPP-4X10GE-LR specifications
| Attribute | Value |
|---|---|
| Part Number | QSFPP-4X10GE-LR |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 4x10GBASE-LR (breakout) |
| Form Factor | QSFP+, hot-swappable |
| Data Rate | 4 × 10 Gbps breakout |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | MPO-12 APC |
| Breakout | 4 × 10G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 18.4 × 72.4 mm |
| Compliance | IEEE 802.3ba, SFF-8436 |
| Platforms | MX / ACX / PTX routers |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | 40G QSFP+ breakout into 4x10GBASE LR Ethernet module |
| Same standard, other names | JNP-QSFP-4X10GE-LR |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QSFPP-4X10GE-LR
The Juniper QSFPP-4X10GE-LR is a hot-swappable QSFP+ 4x10GBASE-LR optical transceiver for 4 × 10 Gbps breakout Ethernet links over single-mode fiber, with an MPO-12 APC interface and reach of up to 10 km. Juniper description: 40G QSFP+ breakout into 4x10GBASE LR Ethernet module. Juniper sells the same optical standard under other names for other platforms or temperature grades: JNP-QSFP-4X10GE-LR. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 4 × 10G. Typical uses: 40G aggregation and data-center links on MX, ACX and PTX Series routers.
- 4 × 10 Gbps breakout 4x10GBASE-LR up to 10 km
- Genuine Juniper part for MX / ACX / PTX routers
- Listed as current in Juniper's Hardware Compatibility Tool
- MPO-12 APC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
QSFPP-4X10GE-LR: frequently asked questions
What is the Juniper QSFPP-4X10GE-LR?
The QSFPP-4X10GE-LR is a QSFP+ 4x10GBASE-LR module for 4 × 10 Gbps breakout links (40G QSFP+ breakout into 4x10GBASE LR Ethernet module). It is used for 40G aggregation and data-center links on MX, ACX and PTX Series routers.
What is the maximum distance of the QSFPP-4X10GE-LR?
Juniper lists the QSFPP-4X10GE-LR for 10 km.
Which fiber and connector does the QSFPP-4X10GE-LR need?
The QSFPP-4X10GE-LR uses an MPO-12 APC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QSFPP-4X10GE-LR?
The QSFPP-4X10GE-LR is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between QSFPP-4X10GE-LR and JNP-QSFP-4X10GE-LR?
They are the same optical standard (4x10GBASE-LR, 10 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Does the QSFPP-4X10GE-LR support breakout?
Yes, Juniper lists it for 4 × 10G operation. Use the matching optics at the far end and configure channelization on the port.
Is your QSFPP-4X10GE-LR genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QSFPP-4X10GE-LR price in India and how do I order?
The Juniper QSFPP-4X10GE-LR price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QSFPP-4X10GE-LR_Datasheet_NextGenNetworks.pdf
Related Juniper parts
JNP-QSFP-4X10GE-LR4x10GBASE-LR QSFP+, 10 kmQSFPP-40GBASE-SR440GBASE-SR4 QSFP+, 100 m OM3 / 150 m OM4QSFPP-4X10GE-SR4x10GBASE-SR QSFP+, 300 m OM3 / 400 m OM4QSFPP-40GBASE-LR440GBASE-LR4 QSFP+, 10 kmSRX-QSFP-40G-LR440GBASE-LR4 QSFP+, 10 kmQSFPP-40GBASE-ER440GBASE-ER4 QSFP+, 40 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales