- Home
- Optical Transceivers
- Juniper
- 40G
- JNP-QSFP-4X10GE-LR
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact JNP-QSFP-4X10GE-LR stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper JNP-QSFP-4X10GE-LR 4x10GBASE-LR QSFP+ 1310nm 10 km
4 × 10 Gbps breakout 4x10GBASE-LR QSFP+ transceiver, 1310 nm, up to 10 km. Genuine Juniper part for QFX, PTX, MX and ACX platforms with matching ports.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- JNP-QSFP-4X10GE-LR
- Series
- Juniper 40G QSFP+
- Category
- Fiber optic transceiver modules
- Datasheet
- JNP-QSFP-4X10GE-LR datasheet (PDF)
JNP-QSFP-4X10GE-LR specifications
| Attribute | Value |
|---|---|
| Part Number | JNP-QSFP-4X10GE-LR |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 4x10GBASE-LR (breakout) |
| Form Factor | QSFP+, hot-swappable |
| Data Rate | 4 × 10 Gbps breakout |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | MPO-12 APC |
| Breakout | 4 × 10G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 18.4 × 72.4 mm |
| Compliance | IEEE 802.3ba, SFF-8436 |
| Platforms | QFX / PTX / MX / ACX |
| Product line | JNP generic (multi-platform) |
| Juniper description | QSFP+ 40G breakout into 4x10GBASE LR up to 10km SMF, MPO-12 APC Receptacle |
| Same standard, other names | QSFPP-4X10GE-LR |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper JNP-QSFP-4X10GE-LR
The Juniper JNP-QSFP-4X10GE-LR is a hot-swappable QSFP+ 4x10GBASE-LR optical transceiver for 4 × 10 Gbps breakout Ethernet links over single-mode fiber, with an MPO-12 APC interface and reach of up to 10 km. Juniper description: QSFP+ 40G breakout into 4x10GBASE LR up to 10km SMF, MPO-12 APC Receptacle. Juniper sells the same optical standard under other names for other platforms or temperature grades: QSFPP-4X10GE-LR. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 4 × 10G. Typical uses: 40G aggregation and data-center links on QFX, PTX, MX and ACX platforms with matching ports.
- 4 × 10 Gbps breakout 4x10GBASE-LR up to 10 km
- Genuine Juniper part for QFX / PTX / MX / ACX
- Listed as current in Juniper's Hardware Compatibility Tool
- MPO-12 APC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
JNP-QSFP-4X10GE-LR: frequently asked questions
What is the Juniper JNP-QSFP-4X10GE-LR?
The JNP-QSFP-4X10GE-LR is a QSFP+ 4x10GBASE-LR module for 4 × 10 Gbps breakout links (QSFP+ 40G breakout into 4x10GBASE LR up to 10km SMF, MPO-12 APC Receptacle). It is used for 40G aggregation and data-center links on QFX, PTX, MX and ACX platforms with matching ports.
What is the maximum distance of the JNP-QSFP-4X10GE-LR?
Juniper lists the JNP-QSFP-4X10GE-LR for 10 km.
Which fiber and connector does the JNP-QSFP-4X10GE-LR need?
The JNP-QSFP-4X10GE-LR uses an MPO-12 APC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the JNP-QSFP-4X10GE-LR?
The JNP-QSFP-4X10GE-LR is listed by Juniper for QFX, PTX, MX and ACX platforms with matching ports. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between JNP-QSFP-4X10GE-LR and QSFPP-4X10GE-LR?
They are the same optical standard (4x10GBASE-LR, 10 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Does the JNP-QSFP-4X10GE-LR support breakout?
Yes, Juniper lists it for 4 × 10G operation. Use the matching optics at the far end and configure channelization on the port.
Is your JNP-QSFP-4X10GE-LR genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the JNP-QSFP-4X10GE-LR price in India and how do I order?
The Juniper JNP-QSFP-4X10GE-LR price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_JNP-QSFP-4X10GE-LR_Datasheet_NextGenNetworks.pdf
Related Juniper parts
QSFPP-4X10GE-LR4x10GBASE-LR QSFP+, 10 kmJNP-QSFP-4X10GE-IR4x10GE IR QSFP+, 1.4 kmJNP-QSFP-40GE-IR440G IR4 QSFP+, 2 kmQFX-QSFP-40G-ESR440GBASE-eSR4 QSFP+, 300 m OM3 / 400 m OM4JNP-QSFP-40GE-ER440GBASE-ER4 QSFP+, 40 kmQFX-QSFP-40G-SR440GBASE-SR4 QSFP+, 100 m OM3 / 150 m OM4Telecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales