Next Gen Networks

FTLX2672D3xx

Finisar FTLX2672D3xx 10G BiDi 30km, CPRI/GbE/FC SFP+ 30km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 10G
  5. FTLX2672D3xx
10G SFP+ OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FTLX2672D3xx 10G BiDi 30km, CPRI/GbE/FC SFP+ 30km

10 Gb/s class 10G BiDi 30km, CPRI/GbE/FC SFP+ transceiver, Channel-specific (see variants), up to 30km, industrial temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FTLX2672D3xx
Family
FTLX2672
Category
Fiber optic transceiver modules
Datasheet
FTLX2672D3xx datasheet (PDF)
10 Gb/sChannel-specific30kmSFP+Industrial tempHot-pluggable

FTLX2672D3xx specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFTLX2672D3xx
Product familyFTLX2672
Form factorSFP+
Standards / applicationSFF-8431, IEEE 802.3ae 10GBASE-LR/LW, 10G FC 1200-SM-LL-L, SFF-8472
Data rate1.0–11.3 Gb/s
WavelengthBiDi 1271/1331 nm
LaserUncooled DFB
ReceiverPIN
Reach30 km single-strand SMF
ConnectorSingle LC
Supply voltage3.3 V
Operating temperatureIndustrial
DiagnosticsSFF-8472
ComplianceRoHS
LifecycleCurrent production

Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.

FTLX2672D3xx: orderable variants (2)

Part numberDetails
FTLX2672D3271271 nm side of the 1271/1331 BiDi pair (suffix meaning inferred from the FTLX2072 datasheet convention; not stated for FTLX2672)
FTLX2672D3331331 nm side of the BiDi pair (same caveat)

Ask for any variant on WhatsApp +91-7827955775 or Sales@nextgennetworks.in – bulk pricing by quantity.

About the Finisar FTLX2672D3xx

The Finisar FTLX2672D3xx (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10G BiDi 30km, CPRI/GbE/FC optical transceiver for 10 Gb/s class links at Channel-specific (see variants) over Simplex SMF LC (BiDi), with reach up to 30km. It is an industrial-temperature part. The FTLX2672D3xx family name covers 2 orderable variants listed below. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.

  • Hot-pluggable SFP+ footprint
  • Bidirectional 10G over single strand single mode fiber
  • Supports 1.0 to 11.3 Gb/s bit rates
  • Uncooled DFB
  • Single LC connector

FTLX2672D3xx: frequently asked questions

What is the Finisar FTLX2672D3xx?

The FTLX2672D3xx is a Finisar SFP+ transceiver for 10G BiDi 30km, CPRI/GbE/FC at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.

What does the 'x' in FTLX2672D3xx mean?

FTLX2672D3xx is Finisar's family / ordering name. The 'x' is replaced by a code to make the exact orderable part number. For this family the codes are: 27, 33. Two-digit numbers are ITU / CWDM wavelength channel codes. See the variants table and tell us which one you need, or share your switch and link details and we will pick the right one.

Which part numbers are in the FTLX2672D3xx family?

Orderable variants include: FTLX2672D327, FTLX2672D333. Next Gen Networks supplies the exact variant you need in bulk with a GST invoice.

Does the FTLX2672D3xx support DDM / digital diagnostics?

Yes. SFF-8472. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

What is the maximum distance of the FTLX2672D3xx?

The FTLX2672D3xx is specified for up to 30km over Simplex SMF LC (BiDi). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

Which fiber and connector does the FTLX2672D3xx use?

The FTLX2672D3xx works at Channel-specific (see variants) over Simplex SMF LC (BiDi). Both ends of a link must use the same optical standard.

Will the FTLX2672D3xx work in my Cisco, Juniper, Arista or HPE switch?

The FTLX2672D3xx follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

What temperature range is the FTLX2672D3xx rated for?

The FTLX2672D3xx is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.

What does the FTLX2672D3xx part number mean?

The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.

Is your FTLX2672D3xx genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FTLX2672D3xx price in India and how do I order?

The Finisar FTLX2672D3xx price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FTLX2672D3xx need?

It runs from 3.3 V.

Need a bulk or project quote?

Government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.

Talk to Sales
Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.

```html
CALL US NOW → CHAT ON WHATSAPP ‹
Call Us Now Chat on WhatsApp
```