- Home
- Optical Transceivers
- Juniper
- 800G
- QDD-2X400G-FR4-P
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QDD-2X400G-FR4-P stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QDD-2X400G-FR4-P 2x400GBASE-FR4 QSFP-DD800 1271-1331nm 2 km
2 × 400 Gbps 2x400GBASE-FR4 QSFP-DD800 transceiver, CWDM4 1271/1291/1311/1331 nm, up to 2 km. Genuine Juniper part for QFX, PTX, MX and ACX platforms with matching ports.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QDD-2X400G-FR4-P
- Series
- Juniper 800G QSFP-DD800
- Category
- Fiber optic transceiver modules
- Datasheet
- QDD-2X400G-FR4-P datasheet (PDF)
QDD-2X400G-FR4-P specifications
| Attribute | Value |
|---|---|
| Part Number | QDD-2X400G-FR4-P |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 2x400GBASE-FR4 |
| Form Factor | QSFP-DD800, hot-swappable |
| Data Rate | 2 × 400 Gbps |
| Protocol | Ethernet |
| Wavelength | CWDM4 1271/1291/1311/1331 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 2 km |
| Connector | Dual Duplex LC |
| Breakout | 2 × 400G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | 0 to 70 °C |
| Dimensions | 8.5 × 18.4 × 78–93 mm |
| Compliance | IEEE 802.3, QSFP-DD MSA, CMIS |
| Platforms | QFX / PTX / MX / ACX |
| Product line | JNP generic (multi-platform) |
| Juniper description | QSFP-DD800, 2x400GBASE-FR4/400G-FR4, SMF 2 km, 0C through 70C, Dual Duplex LC UPC receptacle |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QDD-2X400G-FR4-P
The Juniper QDD-2X400G-FR4-P is a hot-swappable QSFP-DD800 2x400GBASE-FR4 optical transceiver for 2 × 400 Gbps Ethernet links over single-mode fiber, with a Dual LC interface and reach of up to 2 km. Juniper description: QSFP-DD800, 2x400GBASE-FR4/400G-FR4, SMF 2 km, 0C through 70C, Dual Duplex LC UPC receptacle. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 2 × 400G. Typical uses: 800G AI / data-center fabrics and 800G coherent DCI on QFX, PTX, MX and ACX platforms with matching ports.
- 2 × 400 Gbps 2x400GBASE-FR4 up to 2 km
- Genuine Juniper part for QFX / PTX / MX / ACX
- Listed as current in Juniper's Hardware Compatibility Tool
- Dual LC connector · Single-mode fiber
- Operating temperature: 0 to 70 °C
QDD-2X400G-FR4-P: frequently asked questions
What is the Juniper QDD-2X400G-FR4-P?
The QDD-2X400G-FR4-P is a QSFP-DD800 2x400GBASE-FR4 module for 2 × 400 Gbps links (QSFP-DD800, 2x400GBASE-FR4/400G-FR4, SMF 2 km, 0C through 70C, Dual Duplex LC UPC receptacle). It is used for 800G AI / data-center fabrics and 800G coherent DCI on QFX, PTX, MX and ACX platforms with matching ports.
What is the maximum distance of the QDD-2X400G-FR4-P?
Juniper lists the QDD-2X400G-FR4-P for 2 km.
Which fiber and connector does the QDD-2X400G-FR4-P need?
The QDD-2X400G-FR4-P uses a Dual LC connector on single-mode fiber (OS2). Wavelength: CWDM4 1271/1291/1311/1331 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QDD-2X400G-FR4-P?
The QDD-2X400G-FR4-P is listed by Juniper for QFX, PTX, MX and ACX platforms with matching ports. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
Does the QDD-2X400G-FR4-P support breakout?
Yes, Juniper lists it for 2 × 400G operation. Use the matching optics at the far end and configure channelization on the port.
Is your QDD-2X400G-FR4-P genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QDD-2X400G-FR4-P price in India and how do I order?
The Juniper QDD-2X400G-FR4-P price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QDD-2X400G-FR4-P_Datasheet_NextGenNetworks.pdf
Related Juniper parts
QDD-2X400G-FR42x400GBASE-FR4 QSFP-DD, 2 kmQDD-2X400G-LR4-102x400G-LR4-10 QSFP-DD, 10 kmQDD-2X400G-DR4-P2x400GBASE-DR4 QSFP-DD, 500 mQDD-2X400G-LR4-P2x400G-LR4-10 QSFP-DD, 10 kmQDD-2X400G-DR42x400GBASE-DR4 QSFP-DD, 500 mQDD-8X100G-FR18x100GBASE-FR1 QSFP-DD, 2 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales