- Home
- Optical Transceivers
- Juniper
- 200G
- QDD-2X100G-SR4
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QDD-2X100G-SR4 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QDD-2X100G-SR4 2x100GBASE-SR4 QSFP-DD 850nm 100 m OM4
2 × 100 Gbps 2x100GBASE-SR4 QSFP-DD transceiver, 850 nm, up to 100 m OM4. Genuine Juniper part for QFX, PTX, MX and ACX platforms with matching ports.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QDD-2X100G-SR4
- Series
- Juniper 200G QSFP-DD
- Category
- Fiber optic transceiver modules
- Datasheet
- QDD-2X100G-SR4 datasheet (PDF)
QDD-2X100G-SR4 specifications
| Attribute | Value |
|---|---|
| Part Number | QDD-2X100G-SR4 |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 2x100GBASE-SR4 / 8x25GBASE-SR |
| Form Factor | QSFP-DD, hot-swappable |
| Data Rate | 2 × 100 Gbps |
| Protocol | Ethernet |
| Wavelength | 850 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | 100 m OM4 |
| Connector | MPO-12 |
| Breakout | 2 × 100G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | 0 to 70 °C |
| Dimensions | 8.5 × 18.4 × 78–93 mm |
| Compliance | IEEE 802.3, QSFP-DD MSA, CMIS |
| Platforms | QFX / PTX / MX / ACX |
| Product line | JNP generic (multi-platform) |
| Juniper description | QSFP28-DD 2x100GBASE-SR4 and 8x25GBASE-SR Standard Temperature (0 through 70C) |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QDD-2X100G-SR4
The Juniper QDD-2X100G-SR4 is a hot-swappable QSFP-DD 2x100GBASE-SR4 optical transceiver for 2 × 100 Gbps Ethernet links over multimode fiber, with an MPO-12 interface and reach of up to 100 m OM4. Juniper description: QSFP28-DD 2x100GBASE-SR4 and 8x25GBASE-SR Standard Temperature (0 through 70C). Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 2 × 100G. Typical uses: 200G spine and coherent transport links on QFX, PTX, MX and ACX platforms with matching ports.
- 2 × 100 Gbps 2x100GBASE-SR4 up to 100 m OM4
- Genuine Juniper part for QFX / PTX / MX / ACX
- Listed as current in Juniper's Hardware Compatibility Tool
- MPO-12 connector · Multimode fiber
- Operating temperature: 0 to 70 °C
QDD-2X100G-SR4: frequently asked questions
What is the Juniper QDD-2X100G-SR4?
The QDD-2X100G-SR4 is a QSFP-DD 2x100GBASE-SR4 module for 2 × 100 Gbps links (QSFP28-DD 2x100GBASE-SR4 and 8x25GBASE-SR Standard Temperature (0 through 70C)). It is used for 200G spine and coherent transport links on QFX, PTX, MX and ACX platforms with matching ports.
What is the maximum distance of the QDD-2X100G-SR4?
Juniper lists the QDD-2X100G-SR4 for 100 m OM4.
Which fiber and connector does the QDD-2X100G-SR4 need?
The QDD-2X100G-SR4 uses an MPO-12 connector on multimode fiber (OM3/OM4). Wavelength: 850 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QDD-2X100G-SR4?
The QDD-2X100G-SR4 is listed by Juniper for QFX, PTX, MX and ACX platforms with matching ports. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
Does the QDD-2X100G-SR4 support breakout?
Yes, Juniper lists it for 2 × 100G operation. Use the matching optics at the far end and configure channelization on the port.
Is your QDD-2X100G-SR4 genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QDD-2X100G-SR4 price in India and how do I order?
The Juniper QDD-2X100G-SR4 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QDD-2X100G-SR4_Datasheet_NextGenNetworks.pdf
Related Juniper parts
QDD-2X100G-LR42x100GBASE-LR4 QSFP-DD, 10 kmQDD-2X100G-CWDM42x100G-CWDM4 QSFP-DD, 2 kmCFP2-DCO-T-WDM-HG100G/200G coherent DWDM CFP2, 2000 kmCFP2-DCO-T-WDM-1100G/200G coherent DWDM CFP2, 2000 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales