- Home
- Optical Transceivers
- Juniper
- 1G
- SFP-1GE-T
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact SFP-1GE-T stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper SFP-1GE-T 1000BASE-T SFP 100 m
1 Gbps 1000BASE-T SFP copper module, up to 100 m. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- SFP-1GE-T
- Series
- Juniper 1G SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- SFP-1GE-T datasheet (PDF)
SFP-1GE-T specifications
| Attribute | Value |
|---|---|
| Part Number | SFP-1GE-T |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 1000BASE-T |
| Form Factor | SFP, hot-swappable |
| Data Rate | 1 Gbps |
| Protocol | Ethernet |
| Wavelength | N/A (copper) |
| Media | Copper (Cat5e or better UTP) |
| Max Distance | 100 m |
| Connector | RJ-45 |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3 / Telcordia as applicable, SFP MSA |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | GE SFP, 1000BASE-T Plug-in, Module |
| Same standard, other names | CTP-SFP-1GE-T, QFX-SFP-1GE-T, RX-GET-SFP, SFP-1G-T-C, SRX-SFP-1GE-T, SRX-SFP-1GE-T-ET |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper SFP-1GE-T
The Juniper SFP-1GE-T is a hot-swappable SFP 1000BASE-T copper module for 1 Gbps Ethernet links over copper, with an RJ-45 interface and reach of up to 100 m. Juniper description: GE SFP, 1000BASE-T Plug-in, Module. Juniper sells the same optical standard under other names for other platforms or temperature grades: CTP-SFP-1GE-T, QFX-SFP-1GE-T, RX-GET-SFP, SFP-1G-T-C, SRX-SFP-1GE-T. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: Gigabit uplinks, access and WAN hand-off links on MX, ACX and PTX Series routers.
- 1 Gbps 1000BASE-T up to 100 m
- Genuine Juniper part for MX / ACX / PTX routers
- Listed as current in Juniper's Hardware Compatibility Tool
- RJ-45 connector · Copper
- Genuine OEM part · GST invoice · pan-India dispatch
SFP-1GE-T: frequently asked questions
What is the Juniper SFP-1GE-T?
The SFP-1GE-T is an SFP 1000BASE-T module for 1 Gbps links (GE SFP, 1000BASE-T Plug-in, Module). It is used for Gigabit uplinks, access and WAN hand-off links on MX, ACX and PTX Series routers.
What is the maximum distance of the SFP-1GE-T?
Juniper lists the SFP-1GE-T for 100 m.
Which cable does the SFP-1GE-T use?
It has an RJ-45 port and runs over copper (Cat5e or better UTP) cabling.
Which Juniper devices support the SFP-1GE-T?
The SFP-1GE-T is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between SFP-1GE-T and CTP-SFP-1GE-T, QFX-SFP-1GE-T, RX-GET-SFP?
They are the same optical standard (1000BASE-T, 100 m) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your SFP-1GE-T genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the SFP-1GE-T price in India and how do I order?
The Juniper SFP-1GE-T price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_SFP-1GE-T_Datasheet_NextGenNetworks.pdf
Related Juniper parts
CTP-SFP-1GE-T1000BASE-T SFP, 100 mQFX-SFP-1GE-T1000BASE-T SFP, 100 mRX-GET-SFP1000BASE-T SFP, 100 mSFP-1G-T-C1000BASE-T SFP, 100 mSFP-1GE-SX-IT1000BASE-SX SFP, 500 mSFP-1GT13R14BX10-I1000BASE-BX10 SFP, 10 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales