- Home
- Optical Transceivers
- Juniper
- 100G
- CFP2-100G-SR10-D
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact CFP2-100G-SR10-D stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper CFP2-100G-SR10-D 100GBASE-SR10 CFP2 850nm
100 Gbps (10 × 10G) 100GBASE-SR10 CFP2 transceiver, 850 nm. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- CFP2-100G-SR10-D
- Series
- Juniper 100G CFP2
- Category
- Fiber optic transceiver modules
- Datasheet
- CFP2-100G-SR10-D datasheet (PDF)
CFP2-100G-SR10-D specifications
| Attribute | Value |
|---|---|
| Part Number | CFP2-100G-SR10-D |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100GBASE-SR10 / OTU4 |
| Form Factor | CFP2, hot-swappable |
| Data Rate | 100 Gbps (10 × 10G) |
| Protocol | Ethernet |
| Wavelength | 850 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | Per Juniper datasheet |
| Connector | MPO-24 |
| Juniper Part No. | 740-052505 |
| Lifecycle | Juniper End of Life (stock on request) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 12.4 × 41.5 × 107.5 mm |
| Compliance | CFP2 MSA (OIF for coherent) |
| Platforms | MX / ACX / PTX routers |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | 100GBASE-SR10 CFP2 pluggable module compliant with IEEE 802.3ba. Dual-rate (Ethernet & OTN rate) Commercial temperature 70 degrees C |
| Ordering note | Juniper End-of-Life part; new or surplus stock on request. |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper CFP2-100G-SR10-D
The Juniper CFP2-100G-SR10-D is a hot-swappable CFP2 100GBASE-SR10 optical transceiver for 100 Gbps Ethernet links over multimode fiber, with an MPO-24 interface. Juniper description: 100GBASE-SR10 CFP2 pluggable module compliant with IEEE 802.3ba. Dual-rate (Ethernet & OTN rate) Commercial temperature 70 degrees C. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
- 100 Gbps 100GBASE-SR10
- Genuine Juniper part for MX / ACX / PTX routers
- MPO-24 connector · Multimode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
CFP2-100G-SR10-D: frequently asked questions
What is the Juniper CFP2-100G-SR10-D?
The CFP2-100G-SR10-D is a CFP2 100GBASE-SR10 module for 100 Gbps links (100GBASE-SR10 CFP2 pluggable module compliant with IEEE 802.3ba. Dual-rate (Ethernet & OTN rate) Commercial temperature 70 degrees C). It is used for 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
What is the maximum distance of the CFP2-100G-SR10-D?
Juniper does not print a single reach figure for the CFP2-100G-SR10-D in the sources we checked; for coherent and DWDM optics it depends on the line system. Share your link details and we confirm the right optic.
Which fiber and connector does the CFP2-100G-SR10-D need?
The CFP2-100G-SR10-D uses an MPO-24 connector on multimode fiber (OM3/OM4). Wavelength: 850 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the CFP2-100G-SR10-D?
The CFP2-100G-SR10-D is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
Is the CFP2-100G-SR10-D still available?
Juniper has marked the CFP2-100G-SR10-D End of Life. Next Gen Networks sources genuine new and surplus stock on request; tell us the quantity and we confirm availability or quote the current Juniper equivalent.
Is your CFP2-100G-SR10-D genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the CFP2-100G-SR10-D price in India and how do I order?
The Juniper CFP2-100G-SR10-D price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_CFP2-100G-SR10-D_Datasheet_NextGenNetworks.pdf
Related Juniper parts
CFP2-100G-LR4-D100GBASE-LR4 CFP2, 10 kmCFP2-100G-SR10-D3100GBASE-SR10 CFP2, 100 m OM3 / 150 m OM4CFP2-100G-ER4-D100GBASE-ER4 CFP2, 40 kmCFP2-100GBASE-ER4100GBASE-ER4 CFP2, 40 kmCFP2-100GBASE-LR4100GBASE-LR4 CFP2, 10 kmCFP2-100GBASE-SR10100GBASE-SR10 CFP2, 100 m OM3 / 150 m OM4Telecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales