- Home
- Optical Transceivers
- Juniper
- 1G
- CTP-SFP-1GE-LX
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact CTP-SFP-1GE-LX stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper CTP-SFP-1GE-LX 1000BASE-LX SFP 1310nm
1 Gbps 1000BASE-LX SFP transceiver, 1310 nm, up to 10 km SMF / 550 m MMF. Genuine Juniper part for CTP Series platforms.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- CTP-SFP-1GE-LX
- Series
- Juniper 1G SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- CTP-SFP-1GE-LX datasheet (PDF)
CTP-SFP-1GE-LX specifications
| Attribute | Value |
|---|---|
| Part Number | CTP-SFP-1GE-LX |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 1000BASE-LX |
| Form Factor | SFP, hot-swappable |
| Data Rate | 1 Gbps |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Multimode or single-mode fiber |
| Max Distance | 10 km SMF / 550 m MMF |
| Connector | Duplex LC |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3 / Telcordia as applicable, SFP MSA |
| Product line | CTP / other |
| Juniper description | Small Form Factor Pluggable 1000Base-LX Gigabit Ethernet Optic Module, CTP1000 |
| Same standard, other names | EX-SFP-1GE-LX, SFP-1G-LX-C, SFP-1GE-LX, SRX-SFP-1GE-LX, SRX-SFP-1GE-LX-ET |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper CTP-SFP-1GE-LX
The Juniper CTP-SFP-1GE-LX is a hot-swappable SFP 1000BASE-LX optical transceiver for 1 Gbps Ethernet links over multimode or single-mode fiber, with an LC interface and reach of up to 10 km SMF / 550 m MMF. Juniper description: Small Form Factor Pluggable 1000Base-LX Gigabit Ethernet Optic Module, CTP1000. Juniper sells the same optical standard under other names for other platforms or temperature grades: EX-SFP-1GE-LX, SFP-1G-LX-C, SFP-1GE-LX, SRX-SFP-1GE-LX, SRX-SFP-1GE-LX-ET. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: Gigabit uplinks, access and WAN hand-off links on CTP Series platforms.
- 1 Gbps 1000BASE-LX up to 10 km SMF / 550 m MMF
- Genuine Juniper part for CTP Series
- Listed as current in Juniper's Hardware Compatibility Tool
- LC connector · Multimode or single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
CTP-SFP-1GE-LX: frequently asked questions
What is the Juniper CTP-SFP-1GE-LX?
The CTP-SFP-1GE-LX is an SFP 1000BASE-LX module for 1 Gbps links (Small Form Factor Pluggable 1000Base-LX Gigabit Ethernet Optic Module, CTP1000). It is used for Gigabit uplinks, access and WAN hand-off links on CTP Series platforms.
What is the maximum distance of the CTP-SFP-1GE-LX?
Juniper lists the CTP-SFP-1GE-LX for 10 km SMF / 550 m MMF.
Which fiber and connector does the CTP-SFP-1GE-LX need?
The CTP-SFP-1GE-LX uses an LC connector on multimode or single-mode fiber. Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the CTP-SFP-1GE-LX?
The CTP-SFP-1GE-LX is listed by Juniper for CTP Series platforms. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between CTP-SFP-1GE-LX and EX-SFP-1GE-LX, SFP-1G-LX-C, SFP-1GE-LX?
They are the same optical standard (1000BASE-LX, 10 km SMF / 550 m MMF) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your CTP-SFP-1GE-LX genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the CTP-SFP-1GE-LX price in India and how do I order?
The Juniper CTP-SFP-1GE-LX price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_CTP-SFP-1GE-LX_Datasheet_NextGenNetworks.pdf
Related Juniper parts
EX-SFP-1GE-LX1000BASE-LX SFP, 10 km SMF / 550 m MMFSFP-1G-LX-C1000BASE-LX SFP, 10 km SMF / 550 m MMFSFP-1GE-LX1000BASE-LX SFP, 10 km SMF / 550 m MMFSRX-SFP-1GE-LX1000BASE-LX SFP, 10 km SMF / 550 m MMFCTP-SFP-1GE-SX1000BASE-SX SFP, 550 m 50/125CTP-SFP-1GE-T1000BASE-T SFP, 100 mTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales