- Home
- Optical Transceivers
- Juniper
- 100M
- EX-SFP-1FE-LX
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact EX-SFP-1FE-LX stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper EX-SFP-1FE-LX 100BASE-LX SFP 1310nm 10 km
100 Mbps 100BASE-LX SFP transceiver, 1310 nm, up to 10 km. Genuine Juniper part for EX Series switches (EX2300, EX3400, EX4100, EX4300, EX4400, EX4650 and others).
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- EX-SFP-1FE-LX
- Series
- Juniper 100M SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- EX-SFP-1FE-LX datasheet (PDF)
EX-SFP-1FE-LX specifications
| Attribute | Value |
|---|---|
| Part Number | EX-SFP-1FE-LX |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100BASE-LX |
| Form Factor | SFP, hot-swappable |
| Data Rate | 100 Mbps |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | Duplex LC |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3 / Telcordia as applicable, SFP MSA |
| Product line | EX / QFX (switching) |
| Juniper description | SFP 100BASE-LX, LC connector, 1310nm, 10km Reach on Single Mode Fiber |
| Same standard, other names | SFP-1FE-LX-IT |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper EX-SFP-1FE-LX
The Juniper EX-SFP-1FE-LX is a hot-swappable SFP 100BASE-LX optical transceiver for 100 Mbps Ethernet links over single-mode fiber, with an LC interface and reach of up to 10 km. Juniper description: SFP 100BASE-LX, LC connector, 1310nm, 10km Reach on Single Mode Fiber. Juniper sells the same optical standard under other names for other platforms or temperature grades: SFP-1FE-LX-IT. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: Fast Ethernet fiber links on EX Series switches (EX2300, EX3400, EX4100, EX4300, EX4400, EX4650 and others).
- 100 Mbps 100BASE-LX up to 10 km
- Genuine Juniper part for EX switches
- Listed as current in Juniper's Hardware Compatibility Tool
- LC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
EX-SFP-1FE-LX: frequently asked questions
What is the Juniper EX-SFP-1FE-LX?
The EX-SFP-1FE-LX is an SFP 100BASE-LX module for 100 Mbps links (SFP 100BASE-LX, LC connector, 1310nm, 10km Reach on Single Mode Fiber). It is used for Fast Ethernet fiber links on EX Series switches (EX2300, EX3400, EX4100, EX4300, EX4400, EX4650 and others).
What is the maximum distance of the EX-SFP-1FE-LX?
Juniper lists the EX-SFP-1FE-LX for 10 km.
Which fiber and connector does the EX-SFP-1FE-LX need?
The EX-SFP-1FE-LX uses an LC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the EX-SFP-1FE-LX?
The EX-SFP-1FE-LX is listed by Juniper for EX Series switches (EX2300, EX3400, EX4100, EX4300, EX4400, EX4650 and others). Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between EX-SFP-1FE-LX and SFP-1FE-LX-IT?
They are the same optical standard (100BASE-LX, 10 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your EX-SFP-1FE-LX genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the EX-SFP-1FE-LX price in India and how do I order?
The Juniper EX-SFP-1FE-LX price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_EX-SFP-1FE-LX_Datasheet_NextGenNetworks.pdf
Related Juniper parts
SFP-1FE-LX-IT100BASE-LX SFP, 10 kmEX-SFP-1FE-FX100BASE-FX SFP, 2 kmEX-SFP-FE20KT13R15100BASE-BX-U SFP, 20 kmEX-SFP-FE20KT15R13100BASE-BX-D SFP, 20 kmSFP-1FE-FX100BASE-FX SFP, 2 kmSFP-1FE-FX-IT100BASE-FX SFP, 2 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales