- Home
- Optical Transceivers
- Juniper
- 1G
- SRX-SFP-1GE-SX
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact SRX-SFP-1GE-SX stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper SRX-SFP-1GE-SX 1000BASE-SX SFP 850nm 550 m 50/125
1 Gbps 1000BASE-SX SFP transceiver, 850 nm, up to 550 m 50/125. Genuine Juniper part for SRX Series firewalls.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- SRX-SFP-1GE-SX
- Series
- Juniper 1G SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- SRX-SFP-1GE-SX datasheet (PDF)
SRX-SFP-1GE-SX specifications
| Attribute | Value |
|---|---|
| Part Number | SRX-SFP-1GE-SX |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 1000BASE-SX |
| Form Factor | SFP, hot-swappable |
| Data Rate | 1 Gbps |
| Protocol | Ethernet |
| Wavelength | 850 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | 550 m (50/125) / 275 m (62.5/125) |
| Connector | Duplex LC |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3 / Telcordia as applicable, SFP MSA |
| Product line | SRX (security) |
| Juniper description | Small Form Factor Pluggable 1000Base-SX Gigabit Ethernet Optic Module |
| Same standard, other names | CTP-SFP-1GE-SX, EX-SFP-1GE-SX, EX-SFP-1GE-SX-ET, RX-550M-SFP, SFP-1GE-SX, SRX-SFP-1GE-SX-ET |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper SRX-SFP-1GE-SX
The Juniper SRX-SFP-1GE-SX is a hot-swappable SFP 1000BASE-SX optical transceiver for 1 Gbps Ethernet links over multimode fiber, with an LC interface and reach of up to 550 m 50/125. Juniper description: Small Form Factor Pluggable 1000Base-SX Gigabit Ethernet Optic Module. Juniper sells the same optical standard under other names for other platforms or temperature grades: CTP-SFP-1GE-SX, EX-SFP-1GE-SX, EX-SFP-1GE-SX-ET, RX-550M-SFP, SFP-1GE-SX. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: Gigabit uplinks, access and WAN hand-off links on SRX Series firewalls.
- 1 Gbps 1000BASE-SX up to 550 m 50/125
- Genuine Juniper part for SRX firewalls
- Listed as current in Juniper's Hardware Compatibility Tool
- LC connector · Multimode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
SRX-SFP-1GE-SX: frequently asked questions
What is the Juniper SRX-SFP-1GE-SX?
The SRX-SFP-1GE-SX is an SFP 1000BASE-SX module for 1 Gbps links (Small Form Factor Pluggable 1000Base-SX Gigabit Ethernet Optic Module). It is used for Gigabit uplinks, access and WAN hand-off links on SRX Series firewalls.
What is the maximum distance of the SRX-SFP-1GE-SX?
Juniper lists the SRX-SFP-1GE-SX for 550 m (50/125) / 275 m (62.5/125).
Which fiber and connector does the SRX-SFP-1GE-SX need?
The SRX-SFP-1GE-SX uses an LC connector on multimode fiber (OM3/OM4). Wavelength: 850 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the SRX-SFP-1GE-SX?
The SRX-SFP-1GE-SX is listed by Juniper for SRX Series firewalls. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between SRX-SFP-1GE-SX and CTP-SFP-1GE-SX, EX-SFP-1GE-SX, EX-SFP-1GE-SX-ET?
They are the same optical standard (1000BASE-SX, 550 m 50/125) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your SRX-SFP-1GE-SX genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the SRX-SFP-1GE-SX price in India and how do I order?
The Juniper SRX-SFP-1GE-SX price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_SRX-SFP-1GE-SX_Datasheet_NextGenNetworks.pdf
Related Juniper parts
CTP-SFP-1GE-SX1000BASE-SX SFP, 550 m 50/125EX-SFP-1GE-SX1000BASE-SX SFP, 550 m 50/125EX-SFP-1GE-SX-ET1000BASE-SX SFP, 550 m 50/125RX-550M-SFP1000BASE-SX SFP, 550 m 50/125SRX-SFP-1GE-LX-ET1000BASE-LX SFP, 10 km SMF / 550 m MMFSRX-SFP-1GE-SX-ET1000BASE-SX SFP, 550 m 50/125Telecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales