- Home
- Optical Transceivers
- Juniper
- 200G
- QDD-2X100G-LR4
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QDD-2X100G-LR4 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QDD-2X100G-LR4 2x100GBASE-LR4 QSFP-DD 1295/1310nm 10 km
2 × 100 Gbps 2x100GBASE-LR4 QSFP-DD transceiver, LAN-WDM 1295-1310 nm, up to 10 km. Genuine Juniper part for QFX, PTX, MX and ACX platforms with matching ports.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QDD-2X100G-LR4
- Series
- Juniper 200G QSFP-DD
- Category
- Fiber optic transceiver modules
- Datasheet
- QDD-2X100G-LR4 datasheet (PDF)
QDD-2X100G-LR4 specifications
| Attribute | Value |
|---|---|
| Part Number | QDD-2X100G-LR4 |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 2x100GBASE-LR4 |
| Form Factor | QSFP-DD, hot-swappable |
| Data Rate | 2 × 100 Gbps |
| Protocol | Ethernet |
| Wavelength | LAN-WDM 1295-1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | Dual CS |
| Breakout | 2 × 100G |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | 0 to 70 °C |
| Dimensions | 8.5 × 18.4 × 78–93 mm |
| Compliance | IEEE 802.3, QSFP-DD MSA, CMIS |
| Platforms | QFX / PTX / MX / ACX |
| Product line | JNP generic (multi-platform) |
| Juniper description | QSFP28-DD 2x100GBASE-LR4 Standard Temperature (0 through 70C) |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QDD-2X100G-LR4
The Juniper QDD-2X100G-LR4 is a hot-swappable QSFP-DD 2x100GBASE-LR4 optical transceiver for 2 × 100 Gbps Ethernet links over single-mode fiber, with a Dual CS interface and reach of up to 10 km. Juniper description: QSFP28-DD 2x100GBASE-LR4 Standard Temperature (0 through 70C). Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Breakout: 2 × 100G. Typical uses: 200G spine and coherent transport links on QFX, PTX, MX and ACX platforms with matching ports.
- 2 × 100 Gbps 2x100GBASE-LR4 up to 10 km
- Genuine Juniper part for QFX / PTX / MX / ACX
- Listed as current in Juniper's Hardware Compatibility Tool
- Dual CS connector · Single-mode fiber
- Operating temperature: 0 to 70 °C
QDD-2X100G-LR4: frequently asked questions
What is the Juniper QDD-2X100G-LR4?
The QDD-2X100G-LR4 is a QSFP-DD 2x100GBASE-LR4 module for 2 × 100 Gbps links (QSFP28-DD 2x100GBASE-LR4 Standard Temperature (0 through 70C)). It is used for 200G spine and coherent transport links on QFX, PTX, MX and ACX platforms with matching ports.
What is the maximum distance of the QDD-2X100G-LR4?
Juniper lists the QDD-2X100G-LR4 for 10 km.
Which fiber and connector does the QDD-2X100G-LR4 need?
The QDD-2X100G-LR4 uses a Dual CS connector on single-mode fiber (OS2). Wavelength: LAN-WDM 1295-1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QDD-2X100G-LR4?
The QDD-2X100G-LR4 is listed by Juniper for QFX, PTX, MX and ACX platforms with matching ports. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
Does the QDD-2X100G-LR4 support breakout?
Yes, Juniper lists it for 2 × 100G operation. Use the matching optics at the far end and configure channelization on the port.
Is your QDD-2X100G-LR4 genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QDD-2X100G-LR4 price in India and how do I order?
The Juniper QDD-2X100G-LR4 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QDD-2X100G-LR4_Datasheet_NextGenNetworks.pdf
Related Juniper parts
QDD-2X100G-CWDM42x100G-CWDM4 QSFP-DD, 2 kmQDD-2X100G-SR42x100GBASE-SR4 QSFP-DD, 100 m OM4CFP2-DCO-T-WDM-HG100G/200G coherent DWDM CFP2, 2000 kmCFP2-DCO-T-WDM-1100G/200G coherent DWDM CFP2, 2000 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales