- Home
- Optical Transceivers
- Juniper
- 100G
- QSFP-100G-PSM4-T2
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QSFP-100G-PSM4-T2 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QSFP-100G-PSM4-T2 100G PSM4 QSFP28 1310nm 500 m
100 Gbps (4 × 25G) 100G PSM4 QSFP28 transceiver, 1310 nm, up to 500 m. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QSFP-100G-PSM4-T2
- Series
- Juniper 100G QSFP28
- Category
- Fiber optic transceiver modules
- Datasheet
- QSFP-100G-PSM4-T2 datasheet (PDF)
QSFP-100G-PSM4-T2 specifications
| Attribute | Value |
|---|---|
| Part Number | QSFP-100G-PSM4-T2 |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 100G PSM4 |
| Form Factor | QSFP28, hot-swappable |
| Data Rate | 100 Gbps (4 × 25G) |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 500 m |
| Connector | MPO-12 APC |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 18.4 × 72.4 mm |
| Compliance | IEEE 802.3, SFF-8636 |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | QSFP28 100G base PSM4 optics for up to 500 m transmission over parallel SMF |
| Same standard, other names | JNP-QSFP-100G-PSM4 |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QSFP-100G-PSM4-T2
The Juniper QSFP-100G-PSM4-T2 is a hot-swappable QSFP28 100G PSM4 optical transceiver for 100 Gbps Ethernet links over single-mode fiber, with an MPO-12 APC interface and reach of up to 500 m. Juniper description: QSFP28 100G base PSM4 optics for up to 500 m transmission over parallel SMF. Juniper sells the same optical standard under other names for other platforms or temperature grades: JNP-QSFP-100G-PSM4. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
- 100 Gbps 100G PSM4 up to 500 m
- Genuine Juniper part for MX / ACX / PTX routers
- Listed as current in Juniper's Hardware Compatibility Tool
- MPO-12 APC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
QSFP-100G-PSM4-T2: frequently asked questions
What is the Juniper QSFP-100G-PSM4-T2?
The QSFP-100G-PSM4-T2 is a QSFP28 100G PSM4 module for 100 Gbps links (QSFP28 100G base PSM4 optics for up to 500 m transmission over parallel SMF). It is used for 100G core, spine, peering and data-center interconnect links on MX, ACX and PTX Series routers.
What is the maximum distance of the QSFP-100G-PSM4-T2?
Juniper lists the QSFP-100G-PSM4-T2 for 500 m.
Which fiber and connector does the QSFP-100G-PSM4-T2 need?
The QSFP-100G-PSM4-T2 uses an MPO-12 APC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QSFP-100G-PSM4-T2?
The QSFP-100G-PSM4-T2 is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between QSFP-100G-PSM4-T2 and JNP-QSFP-100G-PSM4?
They are the same optical standard (100G PSM4, 500 m) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your QSFP-100G-PSM4-T2 genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QSFP-100G-PSM4-T2 price in India and how do I order?
The Juniper QSFP-100G-PSM4-T2 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QSFP-100G-PSM4-T2_Datasheet_NextGenNetworks.pdf
Related Juniper parts
JNP-QSFP-100G-PSM4100G PSM4 QSFP28, 500 mQSFP-100G-LRBD-U100G LR BiDi QSFP28, 10 kmQSFP-100G-SR1P2100G SR BiDi QSFP28, 70 m OM3QSFP-100G-LRBD-D100G LR BiDi QSFP28, 10 kmQSFP-100G-SR4-C100GBASE-SR4 QSFP28, 70 m OM3 / 100 m OM4QSFP-100G-LR4-T2100GBASE-LR4 QSFP28, 10 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales