- Home
- Optical Transceivers
- Juniper
- 10G
- XFP-10G-S
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact XFP-10G-S stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper XFP-10G-S 10GBASE-SR XFP 850nm 300 m
10 Gbps 10GBASE-SR XFP transceiver, 850 nm, up to 300 m. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- XFP-10G-S
- Series
- Juniper 10G XFP
- Category
- Fiber optic transceiver modules
- Datasheet
- XFP-10G-S datasheet (PDF)
XFP-10G-S specifications
| Attribute | Value |
|---|---|
| Part Number | XFP-10G-S |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 10GBASE-SR |
| Form Factor | XFP, hot-swappable |
| Data Rate | 10 Gbps |
| Protocol | Ethernet |
| Wavelength | 850 nm |
| Media | Multimode fiber (OM3/OM4) |
| Max Distance | 300 m |
| Connector | Duplex LC |
| Juniper Part No. | 740-033777 |
| Lifecycle | Juniper End of Life (stock on request) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 18.35 × 78 mm |
| Compliance | IEEE 802.3ae, XFP MSA |
| Platforms | MX / ACX / PTX routers |
| Product line | MX / PTX / ACX / T / M (routing) |
| Juniper description | 10G Pluggable Transceiver for 10GE, 850nm for 300m Transmission |
| Same standard, other names | SRX-XFP-10GE-SR, SRX-XFP-10GE-SR-ET, XFP-10GE-SR |
| Ordering note | Juniper End-of-Life part; new or surplus stock on request. |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper XFP-10G-S
The Juniper XFP-10G-S is a hot-swappable XFP 10GBASE-SR optical transceiver for 10 Gbps Ethernet links over multimode fiber, with an LC interface and reach of up to 300 m. Juniper description: 10G Pluggable Transceiver for 10GE, 850nm for 300m Transmission. Juniper sells the same optical standard under other names for other platforms or temperature grades: SRX-XFP-10GE-SR, SRX-XFP-10GE-SR-ET, XFP-10GE-SR. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: 10G uplinks, aggregation, core and WAN links on MX, ACX and PTX Series routers.
- 10 Gbps 10GBASE-SR up to 300 m
- Genuine Juniper part for MX / ACX / PTX routers
- Same standard as SRX-XFP-10GE-SR, SRX-XFP-10GE-SR-ET
- LC connector · Multimode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
XFP-10G-S: frequently asked questions
What is the Juniper XFP-10G-S?
The XFP-10G-S is an XFP 10GBASE-SR module for 10 Gbps links (10G Pluggable Transceiver for 10GE, 850nm for 300m Transmission). It is used for 10G uplinks, aggregation, core and WAN links on MX, ACX and PTX Series routers.
What is the maximum distance of the XFP-10G-S?
Juniper lists the XFP-10G-S for 300 m.
Which fiber and connector does the XFP-10G-S need?
The XFP-10G-S uses an LC connector on multimode fiber (OM3/OM4). Wavelength: 850 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the XFP-10G-S?
The XFP-10G-S is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between XFP-10G-S and SRX-XFP-10GE-SR, SRX-XFP-10GE-SR-ET, XFP-10GE-SR?
They are the same optical standard (10GBASE-SR, 300 m) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is the XFP-10G-S still available?
Juniper has marked the XFP-10G-S End of Life. Next Gen Networks sources genuine new and surplus stock on request; tell us the quantity and we confirm availability or quote the current Juniper equivalent.
Is your XFP-10G-S genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the XFP-10G-S price in India and how do I order?
The Juniper XFP-10G-S price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_XFP-10G-S_Datasheet_NextGenNetworks.pdf
Related Juniper parts
SRX-XFP-10GE-SR10GBASE-SR XFP, 300 mSRX-XFP-10GE-SR-ET10GBASE-SR XFP, 300 mXFP-10GE-SR10GBASE-SR XFP, 300 mXFP-10G-L-OC192-SR110GBASE-LR XFP, 10 kmXFP-10GE-LR10GBASE-LR XFP, 10 kmXFP-10G-Z-OC192-LR210GBASE-ZR XFP, 80 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales