- Home
- Optical Transceivers
- Juniper
- 10G
- SFPP-10G-ER-OTN
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact SFPP-10G-ER-OTN stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper SFPP-10G-ER-OTN 10GBASE-ER SFP+ 1550nm 40 km
10 Gbps 10GBASE-ER SFP+ transceiver, 1550 nm, up to 40 km. Genuine Juniper part for MX, ACX and PTX Series routers.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- SFPP-10G-ER-OTN
- Series
- Juniper 10G SFP+
- Category
- Fiber optic transceiver modules
- Datasheet
- SFPP-10G-ER-OTN datasheet (PDF)
SFPP-10G-ER-OTN specifications
| Attribute | Value |
|---|---|
| Part Number | SFPP-10G-ER-OTN |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 10GBASE-ER / OTN |
| Form Factor | SFP+, hot-swappable |
| Data Rate | 10 Gbps |
| Protocol | Ethernet |
| Wavelength | 1550 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 40 km |
| Connector | Duplex LC |
| Lifecycle | Juniper End of Life (stock on request) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3ae, SFF-8431 / SFF-8472 |
| Product line | MX / PTX / ACX / T / M (routing) |
| Same standard, other names | EX-SFP-10GE-ER, QFX-SFP-10GE-ER, SFPP-10G-ER-C, SFPP-10GE-ER, SFPP-10GE-ER-IT, SFPP-10GE-ER-XT |
| Ordering note | Juniper End-of-Life part; new or surplus stock on request. |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper SFPP-10G-ER-OTN
The Juniper SFPP-10G-ER-OTN is a hot-swappable SFP+ 10GBASE-ER optical transceiver for 10 Gbps Ethernet links over single-mode fiber, with an LC interface and reach of up to 40 km. Juniper sells the same optical standard under other names for other platforms or temperature grades: EX-SFP-10GE-ER, QFX-SFP-10GE-ER, SFPP-10G-ER-C, SFPP-10GE-ER, SFPP-10GE-ER-IT. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: 10G uplinks, aggregation, core and WAN links on MX, ACX and PTX Series routers.
- 10 Gbps 10GBASE-ER up to 40 km
- Genuine Juniper part for MX / ACX / PTX routers
- Same standard as EX-SFP-10GE-ER, QFX-SFP-10GE-ER
- LC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
SFPP-10G-ER-OTN: frequently asked questions
What is the Juniper SFPP-10G-ER-OTN?
The SFPP-10G-ER-OTN is an SFP+ 10GBASE-ER module for 10 Gbps links. It is used for 10G uplinks, aggregation, core and WAN links on MX, ACX and PTX Series routers.
What is the maximum distance of the SFPP-10G-ER-OTN?
Juniper lists the SFPP-10G-ER-OTN for 40 km.
Which fiber and connector does the SFPP-10G-ER-OTN need?
The SFPP-10G-ER-OTN uses an LC connector on single-mode fiber (OS2). Wavelength: 1550 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the SFPP-10G-ER-OTN?
The SFPP-10G-ER-OTN is listed by Juniper for MX, ACX and PTX Series routers. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between SFPP-10G-ER-OTN and EX-SFP-10GE-ER, QFX-SFP-10GE-ER, SFPP-10G-ER-C?
They are the same optical standard (10GBASE-ER, 40 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is the SFPP-10G-ER-OTN still available?
Juniper has marked the SFPP-10G-ER-OTN End of Life. Next Gen Networks sources genuine new and surplus stock on request; tell us the quantity and we confirm availability or quote the current Juniper equivalent.
Is your SFPP-10G-ER-OTN genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the SFPP-10G-ER-OTN price in India and how do I order?
The Juniper SFPP-10G-ER-OTN price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_SFPP-10G-ER-OTN_Datasheet_NextGenNetworks.pdf
Related Juniper parts
EX-SFP-10GE-ER10GBASE-ER SFP+, 40 kmQFX-SFP-10GE-ER10GBASE-ER SFP+, 40 kmSFPP-10G-ER-C10GBASE-ER SFP+, 40 kmSFPP-10GE-ER10GBASE-ER SFP+, 40 kmSFPP-10G-LR-C10GBASE-LR SFP+, 10 kmSFPP-10G-DT-ZRC210G DWDM tunable ZR SFP+, 80 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales