- Home
- Optical Transceivers
- Finisar (Coherent)
- 800G
- FTCE8627E1PCA2FY
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCE8627E1PCA2FY stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCE8627E1PCA2FY 2x400G VR4, finned top OSFP 50 m OM4
800 Gb/s 2x400G VR4, finned top (Mouser PN; also seen as FTCE8627E1PCA-2F) OSFP transceiver, 850nm VCSEL x8, up to 50 m OM4, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCE8627E1PCA2FY
- Family
- FTCE8627
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCE8627E1PCA2FY datasheet (PDF)
FTCE8627E1PCA2FY specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCE8627E1PCA2FY |
| Product family | FTCE8627 |
| Form factor | OSFP (finned) |
| Standards / application | IEEE 802.3db (2x400G-VR4); IEEE 802.3ck electrical; OSFP MSA |
| Data rate | 2x425 Gb/s aggregate; 53.125 GBd PAM4 per lane |
| Wavelength | Tx 844 to 870 nm |
| Laser | VCSEL (Coherent page) |
| Receiver | PIN (Coherent page) |
| Reach | 30 m OM3; 50 m OM4/OM5 |
| Connector | Dual MPO-12 APC |
| Tx output power | −4.6 to 4 dBm avg per lane |
| Rx sensitivity | −4.4 dBm (TECQ ≤ 1.8 dB) / −6.2 + TECQ dBm |
| Rx overload / max input | 5 dBm damage threshold |
| Extinction ratio | 2.5 dB min |
| Supply voltage | 3.3 V (3.135–3.465 V) |
| Power dissipation | < 16 W |
| Operating temperature | Commercial |
| Diagnostics | I2C; CMIS 4.0 per MSA (8x100G default) |
| Compliance | Laser eye Class 1M; RoHS (AN-2038) |
| Lifecycle | Current production |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCE8627E1PCA2FY
The Finisar FTCE8627E1PCA2FY (now a Coherent Corp. product, formerly II-VI) is a OSFP (finned) 2x400G VR4, finned top (Mouser PN; also seen as FTCE8627E1PCA-2F) optical transceiver for 800 Gb/s links at 850nm VCSEL x8 over Parallel MMF, dual MPO12, with reach up to 50 m OM4. It is a commercial-temperature part. It belongs to Finisar's FTCE8627 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
- 800G (2x400 VR4) OSFP
- 8x100G PAM4 retimed 106.25 Gb/s electrical interface
- Dual MPO-12 APC
- Single 3.3 V supply
FTCE8627E1PCA2FY: frequently asked questions
What is the Finisar FTCE8627E1PCA2FY?
The FTCE8627E1PCA2FY is a Finisar OSFP (finned) transceiver for 2x400G VR4, finned top (Mouser PN; also seen as FTCE8627E1PCA-2F) at 800 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
What is the maximum distance of the FTCE8627E1PCA2FY?
The FTCE8627E1PCA2FY is specified for up to 50 m OM4 over Parallel MMF, dual MPO12. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCE8627E1PCA2FY?
Per the Finisar family datasheet, the FTCE8627E1PCA2FY transmits −4.6 to 4 dBm avg per lane and has a receiver sensitivity of −4.4 dBm (TECQ ≤ 1.8 dB) / −6.2 + TECQ dBm. Maximum receiver input is 5 dBm damage threshold.
Does the FTCE8627E1PCA2FY support DDM / digital diagnostics?
Yes. I2C; CMIS 4.0 per MSA (8x100G default). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCE8627E1PCA2FY use?
The FTCE8627E1PCA2FY works at 850nm VCSEL x8 over Parallel MMF, dual MPO12. Both ends of a link must use the same optical standard.
Will the FTCE8627E1PCA2FY work in my Cisco, Juniper, Arista or HPE switch?
The FTCE8627E1PCA2FY follows the OSFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCE8627E1PCA2FY vs FTCE8627E1PCA: what is the difference?
Both are in Finisar's FTCE8627 family. They differ in form factor (OSFP (finned) vs OSFP); build / application (2x400G VR4, finned top (Mouser PN; also seen as FTCE8627E1PCA-2F) vs 2x400G VR4 (802.3db), closed top). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCE8627E1PCA2FY rated for?
The FTCE8627E1PCA2FY is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCE8627E1PCA2FY part number mean?
The FTCE prefix marks Finisar's 800G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCE8627E1PCA2FY genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCE8627E1PCA2FY price in India and how do I order?
The Finisar FTCE8627E1PCA2FY price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTCE8627E1PCA2FY need?
It runs from 3.3 V (3.135–3.465 V) with power dissipation of < 16 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTCE8627E1PCA2x400G VR4, 50 m OM4FTCE8627E1PCM800G VR8, 50 m OM4FTCE8627E1PCM-1Y800G VR8, closed top, 50 m OM4FTCE8617E1PCA2x400G SR4, 100 mFTCE4517E1PCM800G DR8, 500 mFTCE4527E1PCM800G DR8+, 2 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales