- Home
- Optical Transceivers
- Finisar (Coherent)
- 2G–4G
- FTLF1321P1WTL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF1321P1WTL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF1321P1WTL OC-48 SR SFP 1310nm FP 2km
up to 2.67 Gb/s OC-48 SR / STM I-16 multirate (GbE, 1-2G FC, 2.67G) SFP transceiver, 1310nm FP, up to 2km, industrial (−40 to 85 °c) temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF1321P1WTL
- Family
- FTLF1321P1
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF1321P1WTL datasheet (PDF)
FTLF1321P1WTL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF1321P1WTL |
| Product family | FTLF1321P1 |
| Form factor | SFP |
| Standards / application | SONET OC-48 SR / SDH STM I-16; also OC-12, OC-3, Gigabit Ethernet, Fibre Channel |
| Data rate | 155–2667 Mb/s |
| Wavelength | 1270–1360 nm |
| Laser | Uncooled Fabry-Perot 1310 nm |
| Reach | 5 km @ OC-48; 10 km @ GbE / 2x FC (9/125 µm SMF) |
| Connector | Duplex LC |
| Tx output power | −9.5 to −3 dBm |
| Rx sensitivity | −18 dBm @ OC-48; −19 dBm @ GbE |
| Rx overload / max input | 0 dBm |
| Extinction ratio | 9 dB min |
| Supply voltage | 3.3 V (3.00–3.60 V) |
| Power dissipation | <700 mW typical (Icc 165 typ / 300 mA max) |
| Operating temperature | Industrial (−40 to 85 °C) |
| Diagnostics | Digital diagnostics via 2-wire serial interface per SFP MSA (temperature, laser bias, Tx/Rx power, voltage; alarm/warning flags) |
| Compliance | Class 1 laser product (FDA, TÃœV, CSA); RoHS compliant |
| Lifecycle | Legacy / end-of-life |
| Variant note | Wide extraction bail |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF1321P1WTL
The Finisar FTLF1321P1WTL (now a Coherent Corp. product, formerly II-VI) is a SFP OC-48 SR / STM I-16 multirate (GbE, 1-2G FC, 2.67G) optical transceiver for up to 2.67 Gb/s links at 1310nm FP over SMF, with reach up to 2km. It is an industrial-temperature part rated −40 to 85 °C. It belongs to Finisar's FTLF1321P1 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
- Up to 2.67Gb/s bi-directional data links
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- Uncooled Fabry-Perot 1310nm laser transmitter
- Metal enclosure, for lower EMI
- Low power dissipation <700mW typical
FTLF1321P1WTL: frequently asked questions
What is the Finisar FTLF1321P1WTL?
The FTLF1321P1WTL is a Finisar SFP transceiver for OC-48 SR / STM I-16 multirate (GbE, 1-2G FC, 2.67G) at up to 2.67 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
What is the maximum distance of the FTLF1321P1WTL?
The FTLF1321P1WTL is specified for up to 2km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF1321P1WTL?
Per the Finisar family datasheet, the FTLF1321P1WTL transmits −9.5 to −3 dBm and has a receiver sensitivity of −18 dBm @ OC-48; −19 dBm @ GbE. Maximum receiver input is 0 dBm.
Does the FTLF1321P1WTL support DDM / digital diagnostics?
Yes. Digital diagnostics via 2-wire serial interface per SFP MSA (temperature, laser bias, Tx/Rx power, voltage; alarm/warning flags). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF1321P1WTL use?
The FTLF1321P1WTL works at 1310nm FP over SMF. Both ends of a link must use the same optical standard.
Will the FTLF1321P1WTL work in my Cisco, Juniper, Arista or HPE switch?
The FTLF1321P1WTL follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF1321P1WTL vs FTLF1321P1BTL: what is the difference?
Both are in Finisar's FTLF1321P1 family and share the same core optics; the suffix marks a different build option (latch, receiver or ordering variant). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF1321P1WTL rated for?
The FTLF1321P1WTL is an industrial-temperature part rated −40 to 85 °C. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLF1321P1WTL part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is the FTLF1321P1WTL still available?
The FTLF1321P1WTL is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTLF1321P1WTL price in India and how do I order?
The Finisar FTLF1321P1WTL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF1321P1WTL need?
It runs from 3.3 V (3.00–3.60 V) with power dissipation of <700 mW typical (Icc 165 typ / 300 mA max).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF1321P1BTLOC-48 SR / STM I-16 multirate, 2kmFTLF1419P1BCL1000BASE-EX / 2G-1G FC, 55kmFTLF1421P1BCLOC-48 IR-1 / STM S-16.1 multirate, 15kmFTLF1421P1BTL-3GCPRI 3G wireless, 15kmFTLF1721P1BCLOC-48 LR-1 / STM L-16.1 multirate, 40kmFTLF1721P2BTLOC-48 LR-1 / STM L-16.1 multirate, 40kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales