- Home
- Optical Transceivers
- Finisar (Coherent)
- 2G–4G
- FTLF1621P2BTL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF1621P2BTL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF1621P2BTL OC-48 LR-2 SFP 80km
up to 2.67 Gb/s OC-48 LR-2 / STM L-16.2 multirate (2.67G) SFP transceiver, 1550nm DFB + APD, up to 80km, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF1621P2BTL
- Family
- FTLF1621P2
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF1621P2BTL datasheet (PDF)
FTLF1621P2BTL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF1621P2BTL |
| Product family | FTLF1621P2 |
| Form factor | SFP |
| Standards / application | SONET OC-48 LR-2 / SDH STM L-16.2; OC-12/OC-3; Gigabit Ethernet (IEEE 802.3); Fibre Channel FC-PI-2 Rev 7.04 |
| Data rate | Up to 2.67 Gb/s |
| Wavelength | 1550nm DFB + APD |
| Laser | Uncooled 1550 nm DFB |
| Receiver | APD |
| Reach | 80km |
| Connector | Duplex LC |
| Supply voltage | 3.3 V |
| Power dissipation | <700 mW typical |
| Operating temperature | Industrial |
| Diagnostics | Built-in digital diagnostic functions |
| Lifecycle | Legacy / end-of-life |
| Variant note | Narrow extraction bail; TL (industrial) grade |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF1621P2BTL
The Finisar FTLF1621P2BTL (now a Coherent Corp. product, formerly II-VI) is a SFP OC-48 LR-2 / STM L-16.2 multirate (2.67G) optical transceiver for up to 2.67 Gb/s links at 1550nm DFB + APD over SMF, with reach up to 80km. It is an industrial-temperature part. It belongs to Finisar's FTLF1621P2 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
- Up to 2.67Gb/s bi-directional data links
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- Uncooled 1550nm DFB laser transmitter
- APD receiver
- Metal enclosure for lower EMI
FTLF1621P2BTL: frequently asked questions
What is the Finisar FTLF1621P2BTL?
The FTLF1621P2BTL is a Finisar SFP transceiver for OC-48 LR-2 / STM L-16.2 multirate (2.67G) at up to 2.67 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
What is the maximum distance of the FTLF1621P2BTL?
The FTLF1621P2BTL is specified for up to 80km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLF1621P2BTL use?
The FTLF1621P2BTL works at 1550nm DFB + APD over SMF. Both ends of a link must use the same optical standard.
Does the FTLF1621P2BTL support DDM / digital diagnostics?
Yes. Built-in digital diagnostic functions. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTLF1621P2BTL work in my Cisco, Juniper, Arista or HPE switch?
The FTLF1621P2BTL follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF1621P2BTL vs FTLF1621P2BCL: what is the difference?
Both are in Finisar's FTLF1621P2 family. They differ in temperature grade (industrial vs commercial). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF1621P2BTL rated for?
The FTLF1621P2BTL is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLF1621P2BTL part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is the FTLF1621P2BTL still available?
The FTLF1621P2BTL is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTLF1621P2BTL price in India and how do I order?
The Finisar FTLF1621P2BTL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF1621P2BTL need?
It runs from 3.3 V with power dissipation of <700 mW typical.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF1621P2BCLOC-48 LR-2 / STM L-16.2 multirate, 80kmFTLF1621P2WCLOC-48 LR-2 / STM L-16.2 multirate, 80kmFTLF1621P2WTLOC-48 LR-2 / STM L-16.2 multirate, 80kmFTLF1519P1BCL1000BASE-ZX / 2G-1G FC, 80-90kmFTLF1619P1BCL1000BASE-EZX / 2G-1G FC, 110-115kmFTLF1521P1BCLOC-48 IR-2 / STM S-16.2 multirate, 15km / 40km classGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales