- Home
- Optical Transceivers
- Finisar (Coherent)
- 2G–4G
- FTRJ8519P1BNL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTRJ8519P1BNL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTRJ8519P1BNL 1G-2G FC SFP 850nm 500m
up to 2.125 Gb/s 1G-2G FC / GbE (2.125G), non-RoHS SFP transceiver, 850nm, up to 500m, extended (−20 to 90 °c) temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTRJ8519P1BNL
- Family
- FTRJ8519P1
- Category
- Fiber optic transceiver modules
- Datasheet
- FTRJ8519P1BNL datasheet (PDF)
FTRJ8519P1BNL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTRJ8519P1BNL |
| Product family | FTRJ8519P1 |
| Form factor | SFP |
| Standards / application | IEEE 802.3 1000BASE-SX; FC-PH/PH2/PH3, FC-PI 13.04 |
| Data rate | 1.0625 / 1.25 / 2.125 Gb/s |
| Wavelength | 830–860 nm |
| Laser | 850 nm oxide VCSEL |
| Reach | 50/125 µm MMF: 550 m @ 1.0625 Gb/s, 300 m @ 2.125 Gb/s; 62.5/125 µm MMF: 300 m @ 1.0625 Gb/s, 150 m @ 2.125 Gb/s |
| Connector | Duplex LC |
| Tx output power | −9 to −3.5 dBm |
| Rx sensitivity | −20 dBm max (−22 typ) @ 1.0625/1.25 Gb/s; −18 dBm max (−20 typ) @ 2.125 Gb/s |
| Rx overload / max input | 0 dBm |
| Extinction ratio | 9 dB |
| Supply voltage | 3.3 V (3.0–3.6 V) |
| Power dissipation | < 750 mW (180 typ / 240 max mA) |
| Operating temperature | Extended (−20 to 90 °C) |
| Diagnostics | Digital diagnostics over 2-wire serial (temp, voltage, bias, Tx/Rx power, alarm/warning flags) |
| Compliance | Class 1 laser product (US FDA, EN/IEC 60825); RoHS not stated |
| Lifecycle | Legacy / end-of-life |
| Variant note | B = narrow extraction bail |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTRJ8519P1BNL
The Finisar FTRJ8519P1BNL (now a Coherent Corp. product, formerly II-VI) is a SFP 1G-2G FC / GbE (2.125G), non-RoHS optical transceiver for up to 2.125 Gb/s links at 850nm over MMF, with reach up to 500m. It is an extended-temperature part rated −20 to 90 °C. It belongs to Finisar's FTRJ8519P1 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- Very low jitter
- Metal enclosure, for lower EMI
- Single 3.3 V power supply
- Extended operating temperature range: −20 °C to 90 °C
FTRJ8519P1BNL: frequently asked questions
What is the Finisar FTRJ8519P1BNL?
The FTRJ8519P1BNL is a Finisar SFP transceiver for 1G-2G FC / GbE (2.125G), non-RoHS at up to 2.125 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
What is the maximum distance of the FTRJ8519P1BNL?
The FTRJ8519P1BNL is specified for up to 500m over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTRJ8519P1BNL?
Per the Finisar family datasheet, the FTRJ8519P1BNL transmits −9 to −3.5 dBm and has a receiver sensitivity of −20 dBm max (−22 typ) @ 1.0625/1.25 Gb/s; −18 dBm max (−20 typ) @ 2.125 Gb/s. Maximum receiver input is 0 dBm.
Does the FTRJ8519P1BNL support DDM / digital diagnostics?
Yes. Digital diagnostics over 2-wire serial (temp, voltage, bias, Tx/Rx power, alarm/warning flags). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTRJ8519P1BNL use?
The FTRJ8519P1BNL works at 850nm over MMF. Both ends of a link must use the same optical standard.
Will the FTRJ8519P1BNL work in my Cisco, Juniper, Arista or HPE switch?
The FTRJ8519P1BNL follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTRJ8519P1BNL vs FTRJ8519P1WNL: what is the difference?
Both are in Finisar's FTRJ8519P1 family and share the same core optics; the suffix marks a different build option (latch, receiver or ordering variant). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTRJ8519P1BNL rated for?
The FTRJ8519P1BNL is an extended-temperature part rated −20 to 90 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTRJ8519P1BNL part number mean?
The FTRJ prefix marks Finisar's earlier-generation SFP / SFF family. The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is the FTRJ8519P1BNL still available?
The FTRJ8519P1BNL is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTRJ8519P1BNL price in India and how do I order?
The Finisar FTRJ8519P1BNL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTRJ8519P1BNL need?
It runs from 3.3 V (3.0–3.6 V) with power dissipation of < 750 mW (180 typ / 240 max mA).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTRJ8519P1WNL1G-2G FC / GbE, 500mFTLF8519P3BNL1000BASE-SX / 1G-2G FC, 550mFTLF8524P2BNL4G/2G/1G FC, 150m (OM2 @4G) / up to 550m lower ratesFTLF8524P3BNL4GFC / 3.7G wireless, 300mFTLF8519P2BCL1000BASE-SX / 1G-2G FC, 550mFTLF1419P1BCL1000BASE-EX / 2G-1G FC, 55kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales