Next Gen Networks

FWLF16217D55

Finisar FWLF16217D55 CWDM multi-rate SFP CWDM 1551nm 80km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 2G–4G
  5. FWLF16217D55
2G-4G SFP OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FWLF16217D55 CWDM multi-rate SFP CWDM 1551nm 80km

up to 2.67 Gb/s CWDM multi-rate OC-48/STM-16, GbE, FC (to 2.67G), APD rx SFP transceiver, CWDM 1551nm, up to 80km, commercial (0 to 70 °c) temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FWLF16217D55
Family
FWLF16217D
Category
Fiber optic transceiver modules
Datasheet
FWLF16217D55 datasheet (PDF)
up to 2.67 Gb/sCWDM 1551nm80kmSFPCommercial tempHot-pluggable

FWLF16217D55 specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFWLF16217D55
Product familyFWLF16217D
Form factorSFP
Standards / applicationSONET, Gigabit Ethernet, Fibre Channel
Data rate0.155–2.67 Gb/s
Wavelength1471/1491/1511/1531/1551/1571/1591/1611 nm (8 CWDM channels)
LaserUncooled DFB
ReceiverAPD
ReachTotal system budget 28–30 dB @2.67 Gb/s, BER<10⁻¹²
Tx output power0 to +5 dBm
Rx sensitivity−28 dBm (BER<10⁻¹²)
Rx overload / max input−9 dBm
Extinction ratio8.2 dB
Supply voltage3.3 V (3.15–3.60 V)
Power dissipationSupply current 210 typ / 300 max mA
Operating temperatureCommercial (0 to 70 °C)
DiagnosticsBuilt-in digital diagnostics, 2-wire serial (AT24C01A 128-byte EEPROM)
ComplianceClass 1 laser product (FDA/CDRH, IEC-825-1)
LifecycleCurrent production
Variant noteWavelength 1551 nm (clasp color: yellow)

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FWLF16217D55

The Finisar FWLF16217D55 (now a Coherent Corp. product, formerly II-VI) is a SFP CWDM multi-rate OC-48/STM-16, GbE, FC (to 2.67G), APD rx optical transceiver for up to 2.67 Gb/s links at CWDM 1551nm over SMF, with reach up to 80km. It is a commercial-temperature part rated 0 to 70 °C. It belongs to Finisar's FWLF16217D family, which has 8 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

  • Up to 2.67 Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • Built-in digital diagnostic functions
  • Very low jitter
  • Metal enclosure, for lower EMI
  • Single 3.3V power supply

FWLF16217D55: frequently asked questions

What is the Finisar FWLF16217D55?

The FWLF16217D55 is a Finisar SFP transceiver for CWDM multi-rate OC-48/STM-16, GbE, FC (to 2.67G), APD rx at up to 2.67 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

What is the maximum distance of the FWLF16217D55?

The FWLF16217D55 is specified for up to 80km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FWLF16217D55?

Per the Finisar family datasheet, the FWLF16217D55 transmits 0 to +5 dBm and has a receiver sensitivity of −28 dBm (BER<10⁻¹²). Maximum receiver input is −9 dBm.

Does the FWLF16217D55 support DDM / digital diagnostics?

Yes. Built-in digital diagnostics, 2-wire serial (AT24C01A 128-byte EEPROM). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FWLF16217D55 use?

The FWLF16217D55 works at CWDM 1551nm over SMF. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.

Will the FWLF16217D55 work in my Cisco, Juniper, Arista or HPE switch?

The FWLF16217D55 follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FWLF16217D55 vs FWLF16217D47: what is the difference?

Both are in Finisar's FWLF16217D family. They differ in wavelength (CWDM 1551nm vs CWDM 1471nm). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FWLF16217D55 rated for?

The FWLF16217D55 is a commercial-temperature part rated 0 to 70 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FWLF16217D55 part number mean?

The FWLF prefix marks Finisar's CWDM / DWDM wavelength-specific SFP family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.

Is your FWLF16217D55 genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FWLF16217D55 price in India and how do I order?

The Finisar FWLF16217D55 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FWLF16217D55 need?

It runs from 3.3 V (3.15–3.60 V) with power dissipation of Supply current 210 typ / 300 max mA.

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.