Next Gen Networks

FWLF163217

Finisar FWLF163217 DWDM OC-48/STM-16 SFP 1563.86nm 120km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 2G–4G
  5. FWLF163217
2G-4G SFP OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FWLF163217 DWDM OC-48/STM-16 SFP 1563.86nm 120km

up to 2.67 Gb/s DWDM OC-48/STM-16 (2.7G), 100GHz C-band SFP transceiver, 1563.86nm (191.7THz, ITU ch17), up to 120km, commercial (−5 to 70 °c) temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FWLF163217
Family
FWLF1632
Category
Fiber optic transceiver modules
Datasheet
FWLF163217 datasheet (PDF)
up to 2.67 Gb/s1563.86nm120kmSFPCommercial tempHot-pluggable

FWLF163217 specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFWLF163217
Product familyFWLF1632
Form factorSFP
Standards / applicationSONET OC-3/12/48
Data rateUp to 2.7 Gb/s (SONET OC-3/12/48)
Wavelength100 GHz ITU grid C-band, 45 channels: ch17 191.7 THz/1563.86 nm to ch61 196.1 THz/1528.77 nm
LaserLow-dispersion DWDM DFB
ReceiverAPD
Reach120 km; total link budget 28–30 dB @2.5 Gb/s; dispersion penalty 3.0 dB @2400 ps/nm
Tx output power0 to +4 dBm
Rx sensitivity−28 dBm (BER<10⁻¹²)
Rx overload / max input−9 dBm; damage threshold +6 dBm
Extinction ratio8.2 dB
Supply voltage3.3 V (3.13–3.50 V)
Power dissipation1.3 W max (Icc 380 mA)
Operating temperatureCommercial (−5 to 70 °C)
Diagnostics2-wire serial digital diagnostics
ComplianceRoHS 2011/65/EU; CDRH and IEC-825 Class 1
LifecycleCurrent production
Variant noteITU 100 GHz channel 17 (ordering table: 17 = 191.7 THz)

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FWLF163217

The Finisar FWLF163217 (now a Coherent Corp. product, formerly II-VI) is a SFP DWDM OC-48/STM-16 (2.7G), 100GHz C-band optical transceiver for up to 2.67 Gb/s links at 1563.86nm (191.7THz, ITU ch17) over SMF, with reach up to 120km. It is a commercial-temperature part rated −5 to 70 °C. It belongs to Finisar's FWLF1632 family, which has 45 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

  • DWDM 2.7G SFP, 100 GHz ITU grid C-band
  • 120 km link lengths
  • Wavelength controlled within ±0.1 nm over life and temperature
  • Extended link budget with APD receiver technology
  • Supports ring topologies with fixed and reconfigurable OADMs
  • Hot-pluggable SFP footprint

FWLF163217: frequently asked questions

What is the Finisar FWLF163217?

The FWLF163217 is a Finisar SFP transceiver for DWDM OC-48/STM-16 (2.7G), 100GHz C-band at up to 2.67 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

What is the maximum distance of the FWLF163217?

The FWLF163217 is specified for up to 120km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FWLF163217?

Per the Finisar family datasheet, the FWLF163217 transmits 0 to +4 dBm and has a receiver sensitivity of −28 dBm (BER<10⁻¹²). Maximum receiver input is −9 dBm; damage threshold +6 dBm.

Does the FWLF163217 support DDM / digital diagnostics?

Yes. 2-wire serial digital diagnostics. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FWLF163217 use?

The FWLF163217 works at 1563.86nm (191.7THz, ITU ch17) over SMF. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.

Will the FWLF163217 work in my Cisco, Juniper, Arista or HPE switch?

The FWLF163217 follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FWLF163217 vs FWLF163218: what is the difference?

Both are in Finisar's FWLF1632 family. They differ in wavelength (1563.86nm (191.7THz, ITU ch17) vs 1563.05nm (191.8THz, ITU ch18)). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FWLF163217 rated for?

The FWLF163217 is a commercial-temperature part rated −5 to 70 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FWLF163217 part number mean?

The FWLF prefix marks Finisar's CWDM / DWDM wavelength-specific SFP family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.

Is your FWLF163217 genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FWLF163217 price in India and how do I order?

The Finisar FWLF163217 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FWLF163217 need?

It runs from 3.3 V (3.13–3.50 V) with power dissipation of 1.3 W max (Icc 380 mA).

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.