- Home
- Optical Transceivers
- Juniper
- 1G
- QFX-SFP-1GE-LX
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact QFX-SFP-1GE-LX stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Juniper QFX-SFP-1GE-LX 1000BASE-LX SFP 1310nm 10 km
1 Gbps 1000BASE-LX SFP transceiver, 1310 nm, up to 10 km. Genuine Juniper part for QFX Series data-center switches.
- Manufacturer
- Juniper Networks (HPE Juniper Networking)
- Mfr part number
- QFX-SFP-1GE-LX
- Series
- Juniper 1G SFP
- Category
- Fiber optic transceiver modules
- Datasheet
- QFX-SFP-1GE-LX datasheet (PDF)
QFX-SFP-1GE-LX specifications
| Attribute | Value |
|---|---|
| Part Number | QFX-SFP-1GE-LX |
| Manufacturer | Juniper Networks (HPE Juniper Networking) |
| Brand | Juniper Networks |
| Standard | 1000BASE-LX |
| Form Factor | SFP, hot-swappable |
| Data Rate | 1 Gbps |
| Protocol | Ethernet |
| Wavelength | 1310 nm |
| Media | Single-mode fiber (OS2) |
| Max Distance | 10 km |
| Connector | Duplex LC |
| Lifecycle | Current (Juniper Hardware Compatibility Tool, Nov 2026) |
| Operating Temp | Per Juniper datasheet |
| Dimensions | 8.5 × 13.4 × 56.5 mm |
| Compliance | IEEE 802.3 / Telcordia as applicable, SFP MSA |
| Product line | EX / QFX (switching) |
| Juniper description | SFP 1000Base-LX Gigabit Ethernet Optics, 1310nm for 10km transmission on SMF |
| Same standard, other names | RX-10KM-SFP |
Values are from the Juniper Hardware Compatibility Tool (November 2026), Juniper optics data sheets and Juniper End-of-Life notices. Confirm your Juniper device model and Junos release with us before ordering.
About the Juniper QFX-SFP-1GE-LX
The Juniper QFX-SFP-1GE-LX is a hot-swappable SFP 1000BASE-LX optical transceiver for 1 Gbps Ethernet links over single-mode fiber, with an LC interface and reach of up to 10 km. Juniper description: SFP 1000Base-LX Gigabit Ethernet Optics, 1310nm for 10km transmission on SMF. Juniper sells the same optical standard under other names for other platforms or temperature grades: RX-10KM-SFP. Junos reads the Juniper coding at insertion, so a genuine module shows correctly in 'show chassis hardware' and avoids unsupported-optic warnings. Typical uses: Gigabit uplinks, access and WAN hand-off links on QFX Series data-center switches.
- 1 Gbps 1000BASE-LX up to 10 km
- Genuine Juniper part for QFX switches
- Listed as current in Juniper's Hardware Compatibility Tool
- LC connector · Single-mode fiber
- Genuine OEM part · GST invoice · pan-India dispatch
QFX-SFP-1GE-LX: frequently asked questions
What is the Juniper QFX-SFP-1GE-LX?
The QFX-SFP-1GE-LX is an SFP 1000BASE-LX module for 1 Gbps links (SFP 1000Base-LX Gigabit Ethernet Optics, 1310nm for 10km transmission on SMF). It is used for Gigabit uplinks, access and WAN hand-off links on QFX Series data-center switches.
What is the maximum distance of the QFX-SFP-1GE-LX?
Juniper lists the QFX-SFP-1GE-LX for 10 km.
Which fiber and connector does the QFX-SFP-1GE-LX need?
The QFX-SFP-1GE-LX uses an LC connector on single-mode fiber (OS2). Wavelength: 1310 nm. Both ends of the link must use the same optical standard.
Which Juniper devices support the QFX-SFP-1GE-LX?
The QFX-SFP-1GE-LX is listed by Juniper for QFX Series data-center switches. Support depends on the exact chassis, line card and Junos release; send us your device model and release and we check it in Juniper's Hardware Compatibility Tool before dispatch.
What is the difference between QFX-SFP-1GE-LX and RX-10KM-SFP?
They are the same optical standard (1000BASE-LX, 10 km) sold under different Juniper names: EX- / QFX- for switches, SRX- for firewalls, SFP- / SFPP- / QSFP- for routers, -C for Common Optics that work across platforms, and -IT / -ET for wider temperature ranges. Order the name Juniper lists for your device; tell us the model and we confirm which one applies.
Is your QFX-SFP-1GE-LX genuine Juniper?
Yes. Next Gen Networks supplies original Juniper parts, not third-party lookalikes or grey-market stock. Every unit is checked before dispatch and we share serial numbers on request so you can verify them with 'show chassis hardware'. If you want a lower-cost Juniper-coded compatible module for non-critical links, ask us and we quote both options.
What is the QFX-SFP-1GE-LX price in India and how do I order?
The Juniper QFX-SFP-1GE-LX price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in and we reply with a GST quote.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Juniper_QFX-SFP-1GE-LX_Datasheet_NextGenNetworks.pdf
Related Juniper parts
RX-10KM-SFP1000BASE-LX SFP, 10 kmQFX-SFP-1GE-SX1000BASE-SX SFP, 550 mEX-SFP-GE80KCW16101000BASE CWDM SFP, 80 kmQFX-SFP-1GE-T1000BASE-T SFP, 100 mEX-SFP-GE80KCW15901000BASE CWDM SFP, 80 kmEX-SFP-GE80KCW15701000BASE CWDM SFP, 80 kmTelecom, government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales