- Home
- Optical Transceivers
- Finisar (Coherent)
- 100G
- FTLC1183SDNx
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLC1183SDNx stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLC1183SDNx 100GBASE-LR4 + OTN CFP 10km
100 Gb/s 100GBASE-LR4 + OTN multirate Gen2 CFP transceiver, LAN-WDM 1295-1310nm, up to 10km.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLC1183SDNx
- Family
- FTLC1183
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLC1183SDNx datasheet (PDF)
FTLC1183SDNx specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLC1183SDNx |
| Product family | FTLC1183 |
| Form factor | CFP |
| Standards / application | CFP MSA; IEEE 802.3ba 100GBASE-LR4; OTU4 4I1-9D1F per ITU-T G.959.1/G.709 (SDN*) |
| Data rate | 103.1 Gb/s (RDN*); 112 Gb/s with OTU3/OTU4 (SDN*) |
| Wavelength | 1310 nm band |
| Laser | 4x LWDM DFB laser |
| Receiver | PIN |
| Reach | 10 km SMF |
| Connector | Duplex LC |
| Supply voltage | 3.3 V |
| Operating temperature | 0 to 70 °C case |
| Diagnostics | Digital (MDIO) |
| Compliance | RoHS |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
FTLC1183SDNx: orderable variants (3)
| Part number | Details |
|---|---|
| FTLC1183SDNL | 100GBASE-LR4 + OTN multirate 10 km Gen2 CFP (Coherent page for SDNX) |
| FTLC1183SDNA | LAN-WDM 1295-1310nm, 10km |
| FTLC1183SDNS | LAN-WDM 1295-1310nm, 10km |
Ask for any variant on WhatsApp +91-7827955775 or Sales@nextgennetworks.in – bulk pricing by quantity.
About the Finisar FTLC1183SDNx
The Finisar FTLC1183SDNx (now a Coherent Corp. product, formerly II-VI) is a CFP 100GBASE-LR4 + OTN multirate Gen2 optical transceiver for 100 Gb/s links at LAN-WDM 1295-1310nm over SMF duplex (LC), with reach up to 10km. The FTLC1183SDNx family name covers 3 orderable variants listed below. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
- 100 Gb/s · 100GBASE-LR4 + OTN multirate Gen2 · up to 10km
- LAN-WDM 1295-1310nm · SMF duplex (LC)
- Genuine Finisar / Coherent optic · GST invoice
- Pan-India dispatch from New Delhi
FTLC1183SDNx: frequently asked questions
What is the Finisar FTLC1183SDNx?
The FTLC1183SDNx is a Finisar CFP transceiver for 100GBASE-LR4 + OTN multirate Gen2 at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
What does the 'x' in FTLC1183SDNx mean?
FTLC1183SDNx is Finisar's family / ordering name. The 'x' is replaced by a code to make the exact orderable part number. For this family the codes are: A, L, S. See the variants table and tell us which one you need, or share your switch and link details and we will pick the right one.
Which part numbers are in the FTLC1183SDNx family?
Orderable variants include: FTLC1183SDNL, FTLC1183SDNA, FTLC1183SDNS. Next Gen Networks supplies the exact variant you need in bulk with a GST invoice.
Does the FTLC1183SDNx support DDM / digital diagnostics?
Yes. Digital (MDIO). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
What is the maximum distance of the FTLC1183SDNx?
The FTLC1183SDNx is specified for up to 10km over SMF duplex (LC). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLC1183SDNx use?
The FTLC1183SDNx works at LAN-WDM 1295-1310nm over SMF duplex (LC). Both ends of a link must use the same optical standard.
Will the FTLC1183SDNx work in my Cisco, Juniper, Arista or HPE switch?
The FTLC1183SDNx follows the CFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What does the FTLC1183SDNx part number mean?
The FTLC prefix marks Finisar's 100G family (QSFP28 / CFP / CFP2 / CFP4). The remaining characters identify the optical design and build variant.
Is your FTLC1183SDNx genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLC1183SDNx price in India and how do I order?
The Finisar FTLC1183SDNx price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLC1183SDNx need?
It runs from 3.3 V.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Finisar_FTLC1183SDNx_Datasheet_NextGenNetworks.pdf
Related Finisar parts
FTLC1183SDNL100GBASE-LR4 + OTN multirate Gen2, 10kmFTLC1183SDNA100GBASE-LR4 + OTN multirate Gen2, 10kmFTLC1183SDNS100GBASE-LR4 + OTN multirate Gen2, 10kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales